TUF X570-PRO WiFi II - AMD Ryzan 5600X - Corsair 32GB 2133 Mhz
Sapphire 4 GB RX580 (old)
PowerColor 16 GB RX7800XT (new)
With my old RX580 everything works fine.
The pc is booting and i see the boot informations for entering the bios and the pc starts with windows 11 correctly
The new graphics card arrived.
So i deinstalled with DDU all graphics drivers in the windows save mode
I removed the old graphics card and installed the new card.
I plug in either DP or HDMI or both and when the computer boots i don't see the TUF Board logo screen to hit the Bios key. it goes straight in to windows. once windows loads the GPU works fine.
I reboot the computer hit the Key for the Bios. i can tell the computer goes to the bios screen because of the beep, however no picture. If i reboot again it goes to Windows with no problems.
In Windows everthing works fine, but if i reboot the pc, i see no bios promt and othe booting sequences.
I also can not boot up in low vga mode or in save mode. No picture
If i remove the new card, and reinstall my old rx580, everthing works fine and correct again.
Have the rx7800xt an internal error, or do i something wrong?
Or need the new card some internal firmware update?
Please help me, otherwise i need to send back the new card
