Hi, got an issure with the newly installed RX6800. My 4K screen (DP) constantly wakes after standby, but the screen remains black so it displays "no signal" and go to standby again. This happens 2-3 times in a minute.
Waking by mouse works fine.
There is also a TV connected to HDMI.
Checked the "atikmdag_dce.log" and its filled with thousands of entrys. (32000 rows!) Not sure about the meaning of every entry, but I often see:
[+00:824:267] [Conn_Hotplug] [DP-2] - Disconnected
[+00:027:759] [Conn_Hotplug] [DP-2] - Connected
While HDMI is always connected:
[+00:026:237] [Conn_Hotplug] [HDMI-1] - Connected
Here is the full log: https://drive.google.com/file/d/1_g2PjssWSKAPiiuUqHwotIg33W91v5W_/view?usp=sharing
Got no issues while the screen is on, everything works normal.
Of cause I tried changing the ports and unconnect the TV.
Any suggestions?
Solved! Go to Solution.
Best guess would be a loose or flaky DP cable. Try another cable before anything else.
Best guess would be a loose or flaky DP cable. Try another cable before anything else.
Many USB peripherals plugged in can mess with sleep. So unplug anything not your keyboard or mouse and see if this behavior continues.
You also might try disabling Hibernation/Fast Startup to see if that helps.
Seems like the DP cable is damaged. Tested another HDMI Cable and the problem was gone.
Ordered a new one. :)
Didn't think of it could be the cable, because it worked well until new GPU...