cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 

PC Graphics

CheetoDerp
Journeyman III
‎12-25-2020 06:09 PM

Rx 580 issues

Every time My GPU tries to clock to a higher speed but the drivers crash, it closes my games and closes the AMD radeon software as well.

0 Likes
1 Solution
CheetoDerp
In response to Plushka
Journeyman III
‎12-25-2020 06:41 PM

I'm using an Evga 500 watt psu, and my card is drawing 10-15 watts. I don't remember if I mentioned what clock speed it was pulling but it was only staying at 300 mhz no matter what I did, and so was memory clock speed even though both were set higher, or were supposed to be higher

 

View solution in original post

0 Likes
3 Replies
Plushka
Adept II
‎12-25-2020 06:17 PM

what psu u have?

0 Likes
CheetoDerp
In response to Plushka
Journeyman III
‎12-25-2020 06:41 PM

I'm using an Evga 500 watt psu, and my card is drawing 10-15 watts. I don't remember if I mentioned what clock speed it was pulling but it was only staying at 300 mhz no matter what I did, and so was memory clock speed even though both were set higher, or were supposed to be higher

 

0 Likes
benman2785
Big Boss
‎12-26-2020 06:41 AM

0. update Win10 to 20H2
1. disable Win10 auto-driver-install
2. use DDU in safe-mode to clean old driver
3. download latest driver from AMD website (not auto-detect)
4. install latest driver
5. test again

PC: R7 2700X @PBO + RX 580 4G (1500MHz/2000MHz CL16) + 32G DDR4-3200CL14 + 144hz 1ms FS P + 75hz 1ms FS
Laptop: R5 2500U @30W + RX 560X (1400MHz/1500MHz) + 16G DDR4-2400CL16 + 120Hz 3ms FS
0 Likes