Good afternoon! When the computer is turned off (goes into sleep mode or turns off completely), the monitors, in turn, start flashing gray (as when automatically searching for a signal on one of the inputs). I reinstalled the drivers, changed the operating system. I tried to change the DisplayPort ports of the video card, turned it on/off: AMD FreeSync and HDR, I changed the DP cables, I also tried to disable the automatic detection of the signal source. When physically disconnecting one of the monitors from the video card, the problem disappears, but only disconnecting the cable from the video card helps, when disconnecting the cable from the monitor (without disconnecting it from the video card), the problem persists, but only with the remaining connected monitor. Before that, 2 monitors were connected: one via HDMI, the second via DisplayPort, and there were no problems. With these monitors, this happens from the first day of use.
Two Acer KG282K monitors (identical) connected via DisplayPort
System Unit Specifications:
MB: ASUS TUF B450-PRO GAMING
Processor: AMD Ryzen 7 5700x
Graphics Processor: AMD Radeon RX 6900 XT
Monitor(X2): Acer KG282K 4K 60 Hz
Is such a problem known and/or can you help with its solution?
Thank you in advance!
P.S. I attach a video to demonstrate the problem.
