Whenever I configure crossfire on the cards, the fans and lighting stops on the sapphire. Please help.
Please provide the essential INFORMATION REQUIRED WHEN POSTING A QUESTION.
Motherboard - ASUS prime x370 pro
CPU- Ryzen 5 1500x
RAM - Hyperx fury 8gigs 2x8
PSU - FSP hyper 600
OS drive- Samsung 100gb
Right off the top, I'd say you have an inadequate power supply for this configuration.
If i do, what could be another problem?
After I installed the driver, there was a popup that said system32 is not compatible with windows
I also calculated that the system takes about 540 watts total, meaning the power supply would be enough
Also, when I start mining, and I try to connect with teamviewer, it doesn't work, but with one rx and a 1050ti it worked perfectly
Also, when mining you need to disable Crossfire.
Thank you for your help! will text back when I get a new PSU
Would a 850watt PSU be sufficient for two strix 580s and a 1050ti?
It will be enought for 2 RX580's. I cannot comment on the requirements for the 1050i.
The Minimum power requires for a single card is 500W.
You can check here > PSU REQUIREMENTS - RealHardTechX
