- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Dual 32 4k screens. Only one detected
Hi. I have an xfx rx 6900xt. And. 2 iiyamma 4k 32" screens.
But only one is detected at a time. ( tested with 2 27 inch screens with no problems) I can connect each screen to a display port singularly. And it shows. OK but together. Only the primary. Is there a limitation so where I am not seeing?
System
Msi tomahawk. X570
Xfx rx 6900xt
Ryzen 9 5950x
128gb ram. Corsair sl
Ax1600w. Psu.
2 x iiyamma 4k. 32" problem
2 x iiyamma black hawk 27. No problem
Singal Cable (as somebody is bound to ask) dp 1.4 8k 144hz
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
How do you have both Monitors connected to the GPU card using the GPU DP Ports?
What is different, as far as features goes, between the 27" and 32" monitors?
Here are the Spec from XFX concerning the outputs on your GPU card: https://www.xfxforce.com/shop/xfx-amd-radeon-tm-rx-6900-xt-gaming-graphics-card-with-16gb-gddr6-amd-...
Does both 32" Monitors have both DP and HDMI Input connections or just DP Input connections?
If they also have a HDMI Input connection try connecting one with DP and the other with HDMI and see if both shows up or are recognized by Windows.
If they are strictly DP Monitors with no HDMI inputs you can try and purchase a Active HD 4K HDMI>DP adapter and see if it works that way.
What shows in both Windows Settings - Display and Device Manager?
Do you have the 32" Monitor drivers installed by any chance?
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi and thanks. XFX support are useless.!
Yes both the 32s have 2 hdmi and dp.
Will try one on hdmi. (need to order a cable. Everything is native display port. I have to hand)
No drivers. Installed iiyamma use the generic driver. Just colour profiles in addition for Adobe ect
Just find it a bit wierd both the 2k 27s work no problem on dp 1.4 so figured the extra size of panel + 4k res might be an issue
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi I have done this. Removed driver. With the software removal tool then reinstalled the catalyst drivers.. This is a full size gpu. In a pc. Not a laptop m version .. Beginning to regret the brand choice. (not the model) xfx have been pretty useless
