cancel
Showing results for 
Search instead for 
Did you mean: 

PC Graphics

archs4
Adept I

Black screen flickering

Hello everyone,

**this is my configuration (bought it 1 month ago):

Dell SE2717H (I've had 2 identical, same problem with both of them)

Cavo HDMI 5mt (I see it has the label High speed Ethernet cable)

Sapphire Pulse RX580 8GB (coil whine under load)

Ryzen 1500x (small +10°C peaks under benchmark)

Corsair Vengeance DDR4 2x4GB 3200Mhz (ok)

B350 Tomahawk (ok)

Thermaltake Smart SE 530W (ok)

Samsung 850 EVO 500 (ok)

Seagate Barracuda 2TB (ok)

Case Fractal Define S (ok)

Windows 10 Pro (ok)

AMD driver 18.1.1 (same problem with the previous 2 versions)

Freesync via HDMI cable, monitor support it and it has only HDMI and VGA ports.

**this is my problem:

3 weeks of normal usage without freesync monitor and then I bought it.

It started 4-5 days ago, I use to power off pc during the night (remove power cable from the wall), when I power it again in the morning and open application such as Battlefield 1 (Youtube too in certain videos) it start to show black screens (black screen flickering) the screen seems to be turned off (no backlight) and then it goes back to normal image. It often resize the image in the wrong way and the frame appears bad-sized.. other times the black screen has backlight

**how I fix it till the next power off (next day):

1) I can remove and reinsert HDMI cable (GPU side or monitor side, no matter) this resolve the problem till the next time i power the pc off for long times..

OR

2) Disable FREESYNC in driver menu

OR

3) Restart PC

All this solutions works till the next power off

**Someone has an idea of what's my problem? Bad GPU? Bad cable? Bad monitor?

I have video of flickering if needed.

Thank you all in advance

0 Likes
21 Replies
stanchev36
Adept I

I have awful screen flickering only on Euro Truck Simulator 2 and i can't fix the problem and unfortunately my video card doesn't support AMD FreeSync.

How I can fix the problem? My driver version is 18.1.1. In the previous driver version, i have this problem too. 

My Specs is:

Intel Core i5 3340

Sapphire Radeon R9 280 Dual-X

A-Data 2X4 DDR3 1600MHz

Cooler Master 600W

A-Data SP 920

Seagate Barracuda 1TB

Windows 10 Pro 64bit

I use HDMI cable to connect my monitor.

0 Likes
benman2785
Big Boss

pls NEVER reomove power plug from the wall - because your system doesnt know what to do anymore after it has power

standby doesnt cost much a year and the Display will autoshut off when there is no signal

but it sounds like your Dell SE2717H has a problem with FreeSync and being off power for a time - or its your GPU (not 100% sure)

and as i said - in moderm times you do your PC no good if you cut off power completely

PC: R7 2700X @PBO + RX 580 4G (1500MHz/2000MHz CL16) + 32G DDR4-3200CL14 + 144hz 1ms FS P + 75hz 1ms FS
Laptop: R5 2500U @30W + RX 560X (1400MHz/1500MHz) + 16G DDR4-2400CL16 + 120Hz 3ms FS
0 Likes

Yeah maybe I'll change this, I dont remove it because of energy consumption but for other reasons, thank you for the suggestion I'll try it .. anyway I have news:

UPDATE 26/01/2018

tried with another monitor (asus vg245he) same problem, now a total of 3 monitors have had exact same problem (2x identical Dell SE2717H and 1x Asus vg245he).

Youtube give me problems too with freesync active (I have issue with all the monitors)

Here are the links for 3 youtube videos I've uploaded:

(RX 580 8GB Sapphire Pulse)

Dell' SE2717H + RX580 - YouTube                          Dell SE2717H + RX580 + Freesync ENABLED + 18.1.1 on Battlefield 1

Rx 580 + VG245HE + 18.1.1 - YouTube                  Asus VG245HE + RX580 + Freesync ENABLED + 18.1.1 on Battlefield 1

Rx580 + 18.1.1 + freesync ENABLED - YouTube    Asus VG245HE + RX580 + Freesync ENABLED + 18.1.1 watching youtube video (generic fullHD)

pls keep me posted

if error persists when you havent unpluged your powercable then please report that behaviour to the driver team

PC: R7 2700X @PBO + RX 580 4G (1500MHz/2000MHz CL16) + 32G DDR4-3200CL14 + 144hz 1ms FS P + 75hz 1ms FS
Laptop: R5 2500U @30W + RX 560X (1400MHz/1500MHz) + 16G DDR4-2400CL16 + 120Hz 3ms FS
0 Likes

UPDATE 27/01/18 14.50

Seems to be strictly related to the power cut off so:

1) POWER CUT OFF + FREESYNC ENABLED = black screen flickering (this issue could be resolved restarting PC or unplugging/plugging HDMI cable once).

(Another thing I observed is that after a period with PC power unplugged  GPU has a strange fans' RPM peak during boot such as 0.5-1 sec at 100% before going to 0 RPM when windows start, this happens only if I've unplugged the power cable, in other cases fans didn't have strange RPM peaks during boot)

2) Youtube issue (power cut off + freesync enabled) disappear completely if I disable "hardware acceleration on chrome" or restart PC or unplug/plug HDMI cable.

intresting.. I'm testing

If I dont unplug the power I dont notice problems.. I need to specify that I shutdown PC before unplug the power (obviously)

benman2785
Big Boss

so i think the problem is either your GPU or your MoBo - one or both need power to fullfill a full boot

PC: R7 2700X @PBO + RX 580 4G (1500MHz/2000MHz CL16) + 32G DDR4-3200CL14 + 144hz 1ms FS P + 75hz 1ms FS
Laptop: R5 2500U @30W + RX 560X (1400MHz/1500MHz) + 16G DDR4-2400CL16 + 120Hz 3ms FS
0 Likes
kwstasps
Journeyman III

i have exactly the same issue as u have..any news?

0 Likes

did you read his last update from 3 days ago?

archs4 wrote:

UPDATE 27/01/18 14.50

Seems to be strictly related to the power cut off so:

1) POWER CUT OFF + FREESYNC ENABLED = black screen flickering (this issue could be resolved restarting PC or unplugging/plugging HDMI cable once).

(Another thing I observed is that after a period with PC power unplugged  GPU has a strange fans' RPM peak during boot such as 0.5-1 sec at 100% before going to 0 RPM when windows start, this happens only if I've unplugged the power cable, in other cases fans didn't have strange RPM peaks during boot)

2) Youtube issue (power cut off + freesync enabled) disappear completely if I disable "hardware acceleration on chrome" or restart PC or unplug/plug HDMI cable.

intresting.. I'm testing

If I dont unplug the power I dont notice problems.. I need to specify that I shutdown PC before unplug the power (obviously)

if your (kwstasps) problem isnt solved by now you should open a new thread

PC: R7 2700X @PBO + RX 580 4G (1500MHz/2000MHz CL16) + 32G DDR4-3200CL14 + 144hz 1ms FS P + 75hz 1ms FS
Laptop: R5 2500U @30W + RX 560X (1400MHz/1500MHz) + 16G DDR4-2400CL16 + 120Hz 3ms FS
0 Likes

I'm testing.. but it really seems related to the power cable unplug, if I don't unplug I can't replicate the issue.. this is strange.. should I think to an hardware problem?

0 Likes

I have almost the same monitor and ryzen pc as yours...when I shut down ups the next day I have those black screens but if I won't shut down the ups the next day everything is normal...

0 Likes

This is really interesting, could you please post your configuration? Have you exactly same mobo as I have?

I have not fixed the problem, the problem exists and is replicable if I unplug the power cable, I've only fixed the "side effects" of the problem. I don't know if this issue could bring to a harder problem to be solved.

benman2785 do we need a new thread if someone else has identical problem or could we continue the conversation? I'm asking because I dont know.. thank you

Ryzen 7 1700,gigabyte ab350 gaming 3,asus strix rx 480,g skill trident z 3200,thermaltake 750,win 10 last update,dell se2717H/HX

0 Likes
benman2785
Big Boss

i dont have any power here - i just want to help
so if its the same problem we surely can talk here about it - but usually those errors arent connected


he says "shut down" - and not unplug the cable/power - so it maybe is a different error

PC: R7 2700X @PBO + RX 580 4G (1500MHz/2000MHz CL16) + 32G DDR4-3200CL14 + 144hz 1ms FS P + 75hz 1ms FS
Laptop: R5 2500U @30W + RX 560X (1400MHz/1500MHz) + 16G DDR4-2400CL16 + 120Hz 3ms FS
0 Likes

No its exactly the same...To be more specific turn it off is unplug but u doing with a button.but anyway the result it's the same.

0 Likes

kwstasps - NO ITS NOT THE SAME!

if you simply shutdown your PC there is still power on your MoBo - but archs4 UNPLUGGED his PC from the power-source - that is TOTALLY different

PC: R7 2700X @PBO + RX 580 4G (1500MHz/2000MHz CL16) + 32G DDR4-3200CL14 + 144hz 1ms FS P + 75hz 1ms FS
Laptop: R5 2500U @30W + RX 560X (1400MHz/1500MHz) + 16G DDR4-2400CL16 + 120Hz 3ms FS
0 Likes

Maybe I'm not clear...I shut down the pc and I cut off the power by switching off the ups so the pc and everything that is plugged on ups is out of power.

0 Likes

you shut down the computer AND THEN switch of the power with something like this?
Valueline-6-fach-Verteilersteckdose-schaltbar-Mehrfachstecker-schwarz.jpg

welcome to what i said - simply DONT switch of the power from your system

your behaviour isnt a bug - it is based on the fact that your MoBo or PSU or GPU need stand-by-power to actually boot correcty
this is mainly because of some internal chips simply need power AND the fact that without stand-by the "start current" ("Startstrom") peaks WAY to high so some stuff didnt work properly

i think if you switch on power to PSU or plugin power 30-1h before starting the PC it may be enough to work properly

but i repeat myself - it is NOT a bug - neither Hardware or Software is wrong/bugged/damaged - it is simply a user-error

PC: R7 2700X @PBO + RX 580 4G (1500MHz/2000MHz CL16) + 32G DDR4-3200CL14 + 144hz 1ms FS P + 75hz 1ms FS
Laptop: R5 2500U @30W + RX 560X (1400MHz/1500MHz) + 16G DDR4-2400CL16 + 120Hz 3ms FS
0 Likes
kagebunshin15
Journeyman III

I've been having the same problem, been communicating with AMD support for the last month and I keep getting generic feedback, no help whatsoever from them. I also have a Sapphire RX580 8GB card, it seems the AMD drivers aren't working so well with the Sapphire hardware, I've logged a call with Sapphire as well, but again, generic troubleshooting responses that I have tried before trying to contact support.

I'm getting really fed up with both AMD and Sapphire, neither company is stepping up to solve the issue, and it seems loyalty and long time supporters don't receive an ounce of respect or courtesy even.

0 Likes
molokow
Elite

DO you have a dvi adapter? If so change it. That was my problem.

0 Likes
1337x
Journeyman III

Found that the problem occurs right between the bios start up and the windows start up and is probably caused by the freesync through my DP cable. Shouldn't be anything of concern

0 Likes
apico
Journeyman III

i had the same problem with COD WZ and other games as well ... i turned of free sync and from 75Hz i go to 60Hz it was ok till my pc turned off and never turned on again .... i was pressing the power button but it didn't even go to the boot , it was just the led and fans that was working. i borrowed a psu from a friend to check if that was the problem and yes when i plug in the borrowed psu the pc worked well. So i bought a corsair rm750x and that fixed all the problems ... now i have enabled free sync and my screen works at 75Hz as well. 
my pc build is :
MSI B350m mortar 

Ryzen7 1700x
RX580 8gb PULSE

G.SKILL 8gb 3000 MHz AEGIS

SSD sumsung 120gb 

PSU coolermaster RS500-ACABB1-EU B2-SERIES 500W

then : PSU corsair rm750x(2018) 750w 80 plus gold 

0 Likes