my pc specs are
CPU ryzen 9 5900x
mobo X570-F GAMING
ram 32gb 3200 mhz
GPU just upgraded to a powercolor hellhound 7900xtx from a 1080ti
PSU corsair 1000W platinum
HDD 931GB Seagate FireCuda 510 SSD
when i run a rasterization benchmark on cyberpunk it runs fine to the end but the second i try a benchmark with raytracing my computer will shut off and wont turn back on until i turn my (UK) plug socket off and back on. with ray tracing turned off i can play for about 2 minutes before my pc shut off again. is my new card faulty or is 1000W not enough to power my system?
Solved! Go to Solution.
Usually ray tracing draws more power so I suspect a power supply issue or...
Do you have two separate power cables from the PSU to the GPU ? Running a single power cable with 2 connectors at the end will definitely cause issues on a 7900XTX.
What brand PSU is it
its from corsair but i forgot the exact model, i cant open the pc to check doe to disability but i will ask my brother to look for me when he is free
bump
Usually ray tracing draws more power so I suspect a power supply issue or...
Do you have two separate power cables from the PSU to the GPU ? Running a single power cable with 2 connectors at the end will definitely cause issues on a 7900XTX.
this was exactly the issue thank you so much!