In the last releases of drivers, missing resolutions when VSR activated: missing 1920x1080 and 1920x1200. My resolution is 1600x900.
System:
AMD Phenom II X4 925
8 Gb RAM
Gigabyte R9 270X 2 Gb
Resolution: 1600x900.
Windows 7 Ultimate (64-bit) SP1
Solved! Go to Solution.
With driver 18.7.1 - all became as before, works normal.
How to Enable and Configure AMD Virtual Super Resolution | AMD
Supported VSR modes are dependent on the target display's native timing (resolution, refresh rate). However, some VSR modes are only available on certain AMD GPUs. Please refer to the table below for supported VSR modes.
Target Display Timing | Supported VSR Modes |
1366 X 768 @ 60HZ | 1600 X 900 1920 X 1080 |
1600 X 900 @ 60HZ | 1920 X 1080 |
1920 X 1080 @ 60HZ | 2560 X 1440 3200 X 1800 3840 X 2160 (AMD Radeon™ R9 285, AMD Radeon™ R9 380 and AMD Radeon™ R9 Fury Series) |
1920 X 1200 @ 60HZ | 2048 X 1536 2560 X 1600 3840 X 2400 (AMD Radeon™ R9 285, AMD Radeon™ R9 380 and AMD Radeon™ R9 Fury Series) |
2560 X 1440 @ 60HZ | 3200 X 1800 |
1920 X 1080 @ 120HZ | 1920 X 1200 @ 120HZ 2048 X 1536 @ 120HZ |
I know that, but after activating VSR enabling only 1600x1200, higher variants of resolution is missing. Bug in the last few version of drivers, on 18.2.1 all works normal.
What do you mean "enabling only 1600x1200" ? You said your native resolution is 1600x900. If that is so...VSR mode is 1920x1080....does it not show that as available? Do you have display scaling enabled?
Very strange....contact AMD support with this problem > Email Form
With driver 18.7.1 - all became as before, works normal.
Nice. Im still having problems though
Try delete current driver by DDU in safe mode, and install 18.7.1.
I did that and it still didn't work, until....i disabled GPU scaling. For some reason GPU scaling disables a set of resolutions. Not sure why that is. Before the resolutions showed up with GPU scaling enabled. LOL. Go figure.