I have download from here https://www.amd.com/de/products/software/ryzen-master.html#download
it use automatic german , in settings i see nothing that can change language . I do a new curve optimize per core with -50 now(before was default -30). no crashes but same. after choose pro Kern(per core) übernehmen(accept) and reboot left side show Modus Alle Kerne(Mode All Core). what is problem ?. maybe need some special bios settings ?. I have a MSI B650 board
EDIT:
I think my CPU have lots too much power consumption in idle in Hwinfo. it is 20 watts . in forums can read a 5600G need only 10 watts in this hwinfo display . change to standard also not help. I sue 144 hz 2560x1440 display. with 2560x1440 60 hz it is 1 watt less . normaly a 8600G should be at least perform in power consumption as a 5600G in idle
In the advanced view there can see that the curve optimizer all cores seem have a Bug. in core 1 it set to -255 . Or did you think there can a CPU work with that value ?
I see no AGPU curve optimization tests . how can i do this, or is it not possible ?
It seem the core one value -255 is ignored because ryzen master notice it is too low and all core is used or it can be this way when all cores are good at -50 (millivolt i guess) it is display as all cores. so i need try out more - settings ?. does -100 often work ?.
with the default -30 mv cpu package is 20-22 watt in idle. with -50 it is 17-19 watts. guess under load it is also 15% less power consumption
I have done curve optimisation per core with -100 then -150 . it optimize complete without crash. but on some page it show -50 on other page - 150. I think the -50 is correct because idle power consumption is same as with -50.
how can report a bug and get answer from AMD if that is a CPU limit or maybe a Bug in Ryzen master ?
I have verify in manual mode. I can insert at 1. core -30 let other cores -40 then it show this per core values instead all cores. Limit is really -50 .I find AMD support page where they answer and ask about that
To get best i think underclock cpu and overclock GPU core from 8600G . currently a game use 40 % CPU 87 watt is reach and GPU downclock to 2700 with 99% GPU load. Temperature is only 60 celcius(CPU Limit is 95 celcius) with silent 900 rpm. I use only a cheap Alpenföhn Ben Nevis Advanced for cooling. with FSR 3 frame gen i can play what i like with over 70 fps. only sometimes FSR 3 frame gen stop to create new frames because the pixel distance between frame is too much on fast rotate.
Maybe the limit to disable Frame generation should be set by user. during move i never see very bad notice frame gen problems on fast rotate. and if some maybe look much better as when frame rate drop from 70 fps to 35 fps
my CPU have no problem with -50, so can go lower. In the stress test when all cores are test it reach 82 celcius with all 6 cores at 4.7 GHZ. base clock in spec is only 4.3 GHZ
Have you tried applying a negative CO to the GPU as well?
On my 5700G I have -25 CO set for both CPU and GPU as well as boost overclock +200 on both CPU and GPU.
set -50 work in theory, here ryzen master allow lowest limit -50 .but can you suggest a AMD GFX stresstest ?. I see on a friend PC in radeon page a stresstest for his external RX card. but i find none in my radeon APU
