PC Config:
Ryzen 5 2600 Currently Stock With an Arctic Freezer 34 Esports Duo
4x8GB Ripjaws V CL16-18-18-38 3200MHz Currently Running @ 2666Mhz
Asrock B450 Pro4 Updated to the latest Bios
Adata SU800 256GB Sata SSD (With plenty of GBs available)
Seagate Barracuda HDD 2TB ST2000DM008
Corsair TX550M 80 Plus Gold
RX 6650 XT SAPPHIRE Pulse
Monitors: AOC G242U 1080p 144Hz Freesync Premium, AOC G2460V 1080p 75Hz
A few days ago I upgraded from RX 590 Nitro+ to the RX 6650 XT and immediately I started noticing serious performance issues on games like Destiny 2, which is what I mainly play, Need For Speed Heat, Final Fantasy XV Windows Edition and even League of Legends. Card runs pretty well on Resident Evil Village and fairly well on Risk of Rain 2 with high settings (with some small insignificant drops on RoR2). At first I believed that my computer was getting bottlenecked by the CPU but after looking at other people's performance with this combo I don't really think that's the case. I have tried a lot of fixes I've read online but none has worked for me so far.
What I've Tried So Far:
Overclocked CPU to 4.1Ghz
Rolling back to countless number of previous drivers (Using DDU every time)
Changed the ShaderCache Value in regedit and Reseted Shader Cache Through Amd Software
Raised Power Limit to 10% and raised Min Frequency to over 2000Mhz
Turned off High Precision Event Timer
Booted PC with 2x8GB of Ram @3200Mhz XMP Speed
Used both Gaming and Standard Profiles in AMD Software
Tried Anti-Lag both on and off
Changed Texture Filtering Quality to Performance
Was on Windows 11, Clean Installed to Windows 10
All my component drivers are up to date
Turned off SVM Mode
Disabled ULPS Using MSI Afterburner
Used Both High and Ultimate Performance Windows Power Plans
Ran both FurMark and Heaven Benchmark and got pretty fine results
Tried Low, Medium, High, Highest Presets on Destiny 2 with no real change on performance on lower settings
Raised Priority of Destiny 2 to high through Task Manager
V-Sync off pretty much 99% of the time
Disabled MPO in regedit
I had no problem running any games with my RX 590 and I was probably getting more FPS in Destiny 2 with it in certain areas. I've noticed that in the games my RX 6650 XT is underperforming the GPU Utilization was at 75% max and usually going lower than that. My changes in frequency tuning (raising Min Frequency even up to 2600) have done nothing to help. It's not a PSU issue cause the 6650 has the same power draw as my RX 590. The card ran perfectly in benchmarks and in Resident Evil Village at 98%-99 GPU Utilization.
Could really use some help with this.
You can also contact me on Discord for any questions. Username: Kyrblackeye
