Hi,
I'm using 7950x3d hybrid graphics feature in combination with a 7900xt. Two Displays are connected
1: 3840x1600 via USB-C and 2048x1600 via HDMI on the mainboard.
Overall it works as expected, but there are 3 issues present:
1. When try to change customize settings in wattman, wattman switch back the selection in the tab to silence.
Workaround for this is behavior, is to run furmark so that the 7900xt becomes active. Then you can select and
change the custom settings.
Expected beahvior: Change custom settings also when 7900xt is inactive
2. When switching my main screen to an other imput ( hdmi ) and switch back to USB-C, the screen stays black.
Only reboot cures this problem.
3. When changing values using wattman it could happen, that the card becomes instability because of too much UV.
That is as expected, but when this happens the whole driver apears as broken in device manger ( with yellow tag ).
To solve this issue, the whole driver must be reinstalled. Only reboot does not solve that.
One Improvement:
Please add a quick save/load function with button for wattman settings.
