I am stuggling with the installation / upgrade of Chipset / Raid drivers.
My Setup is as follows:
Asus Prime X370 Pro with BIOS 4011
1 Samsung MZVPV256HDGL SM951 NVMe SSD in M.2 Slot for Windows 10 Pro, Samsung Driver 2.3.0.1709
6 Spinner HDs attached to Mobo SATA Ports in RAID0 configuration. This RAID0 array is working.
I cannot login to RaidXpert2 WebGUI. The submit button is grayed out. I have deleted rc_login.txt to reset the password, but the button is still grayed out.
As a next step I am upgrading the drivers:
First I downloaded the AMD Chipset Drivers from here https://support.amd.com/en-us/download/chipset?os=Windows%2010%20-%2064
When I install, I get a message to make sure my NVMe SSD is configured as RAID in BIOS. My BIOS has no option to chose anything for NVMe. So I did not install this driver.
Currently installed is 17.40.3765
Next I downloaded the AMD RAID Installer (SATA RAID Only) from here https://support.amd.com/en-us/download/chipset?os=Windows%2010%20-%2064
Installed RCBottom 9.2.0.70 for AMD-RAID Bottom Device without issues
Installing RCRaid 9.2.0.70 for AMD-RADI Controller [storport] starts installing and then hangs forever at "installing drivers".
In the end I had to use the reset button to restart the PC. Luckily Windows came up again.
So now, I am a but stuck
How do I get both of these driver packages installed correctly?
How do I get access to RaidXpert WebGUI to work again?
Thanks a lot for any help
