cancel
Showing results for 
Search instead for 
Did you mean: 

PC Drivers & Software

LancSept
Journeyman III

0 RPM setting cannot work after system crashing

My computer crashed while playing Black Myth: Wukong with 7900XT. Driver version 24.7.1.

At the first time rebooting, everything normal but the monitor, it couldn't display, then I tried rebooting again it works. But when I check the Adrenalin's Perfomence -> Adjust, found 0 RPM setting didn't work. I tried to completely uninstall the driver with DDU and reinstall the same version, still couldn't work...

Dose anyone have encounter this problem? Or it is a known issues that driver team is following?

Thanks.

LancSept_0-1724596113730.png

 

0 Likes
2 Replies
FunkZ
Grandmaster

Based on my 7900XT experience, the Zero RPM most likely quit working when you upgraded to 24.7.1 - rather than associated with the game crash.

When I upgraded from 24.5.1 to 24.7.1 the fans were constantly spinning at 500+rpm and the idle board power had jumped to 40W. I reverted Adrenalin to 24.5.1 and Zero RPM works again and idle board power is back down to 15W.

Ryzen R7 5700X | B550 Gaming X | 2x16GB G.Skill 3600 | Radeon RX 7900XT
Ryzen R7 5700G | B550 Gaming X | 2x8GB G.Skill 4000 | Radeon Vega 8 IGP
Ryzen R5 5600 | B550 Gaming Edge | 4x8GB G.Skill 3600 | Radeon RX 6800XT

Thanks for replying.

My 7900XT is from AsRock Phantom Gaming series, the idle board power always between 45W, whether I update Adrenalin or not.

I updated Adrenalin to 24.8.1, still the same...

Maybe I need to revert Adrenalin to 24.5.1 then test again.

0 Likes