cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 

General Discussions

Julo7800xt
Journeyman III
a month ago

Problem : no display after updating bios

Hi everyone,

First of all here’s my current setup :

MOBO : MSI B650M A WIFI 

CPU : ryzen 5 7600

GPU : rx7800xt speedster 

Ram : 32gb ddr5

 

lmk if any other spec is needed 

So basically, this evening, i did an update on the latest bios (7D77v1M) because i had a problem of parasite noises when plugging speakers at the back of my pc. I thought everything was going as planned but i might have panicked because once the download was completed ( approximatively 5 seconds after having a black screen) i thought that something was wrong because i was getting no display. Watched a bunch of tutorials : Did the Cmos reset unplugging the battery…, checked hdmi on monitor and graphics card, tried to flash bios… nothing brought display back. So i tried something else : i plugged my hdmi in the motherboard, no display. I pressed the reset button on the front of my pc case : i got display with my full normal screen. Problems : i was on integrated graphics and i could only get display if i pressed reset everytime i would boot my pc. Just tried to m flash bios with the previous version but it doesn’t seem like it works. Also, graphics card fans are working so i guess it’s not dead ( i hope so ). Let me know if you need any more precisions, i am waiting for your answers if anyone can help me because i’m in a terrible mental state as i’m this close to switch back to consoles. Thanks guys!

3 Replies
FunkZ
Grandmaster
a month ago

MSI has a video on how to use their M-Flash BIOS utility.

https://www.youtube.com/watch?v=sKMub20CUNI

Download the BIOS version and extract the file to a USB drive. Then reboot and use M-Flash to update.

https://www.msi.com/Motherboard/PRO-B650M-A-WIFI/support

Make sure to wait until the process completes 100% and instructs you to reboot!

BIOS settings are lost on version update, make sure to re-enter BIOS after the restart and load optimized defaults, or reselect your settings based on hardware requirements.

 

Ryzen R7 5700X | B550 Gaming X | 2x16GB G.Skill 3600 | Radeon RX 7900XT
Ryzen R7 5700G | B550 Gaming X | 2x8GB G.Skill 4000 | Radeon Vega 8 IGP
Ryzen R5 5600 | B550 Gaming Edge | 4x8GB G.Skill 3600 | Radeon RX 6800XT
JakeRyan44
Adept I
a month ago

It sounds like a frustrating situation, but don’t worry! Since the GPU fans are working, it’s probably not dead. Try resetting the BIOS again and ensure the primary display is set to PCIe in the BIOS settings, not integrated graphics. You can also try reseating your GPU to make sure it's properly connected. If that doesn’t work, consider rolling back the BIOS to the previous version. Hopefully, this helps get your display working again!

Julo7800xt
Journeyman III
3 weeks ago

Hey! thanks everyone for the help

Before i did try to flash bios but it didnt work and i also tried the 2nd answer! 

I took it a third party shop and they fixed it, they told me it was a problem with the power supply…No matter the cause, they fixed ti

again, thanks everybody for the help!