Personally as I'm gaming and using my AMD computer I understand that all supercomputers have ZERO LATENCY.
So i set my RAM to be lowest latency timings possible even if it means stepping down mhz to 1866mhz or 1600mhz or whatever and then disable geardown mode and command rate 1T and such.
I've got some Teamgroup xtreme ARGB CL14 3600mhz samsung B-die memory now. But there wasnt much difference compared to my non bdie cheapest trident z RGB 16 memory 3200mhz set at similarly 1866mhz.
I am very disappointed that just by playing around a bit with my mainboards secondary timings I can get my PC to run much faster than when using the fastest settings with the "Ryzen RAM calculator" app linked previously. even more regrettable is that the timings on the RAM calculator only do for 2666mhz min not how to 1866mhz or 1600mhz.
I'm also concerned as my previous Gskill ripjaws V 3200mhz CL 16 RAM and trident Z RGB CL 16 3200mhz RAM had very very different looking refresh cycle timings and minimum mhz and CAS latency timings in the "DRAM Timing info in the bios" from reading the JDEC info stuffs on the RAM sticks once its inserted. I also believe that the XMP profiles maybe dont add much to the experience other than upping the voltage to the desired amount so I just up the voltage to what the XMP profile would want it to be then 1866mhz and tighten all my timings and test out my secondary timings till i get my PC going like a snappy responsive rocket. Am I doing something wrong somewhere somehow? Can anyone enlighten me on the correct timings and settings for my RAM and PC i've an asrock x570 steel legend board and a 2700x and red devil 5700xt 32GB of xtreme ARGB CL14 3600mhz. In the secondary timings basically the S/L ones I do like 4,5 then 6,6 and in the ones for the umm forgot what its called TWR is 10? and the one that wants 2,2 or 3,3 i set to instead 6,6 it speeds up the system a bit maybe? in the primary ram timings i do like 13,13,13,35 o 38 for the TRAS and for TRC i think it was i can do 29 or 32 or 38 or something but my RAM wants 43 or 42 for some reason in JDEC timings..
I thought TRC was supposed to be CAS x2 +10 o something weird maths calc minimum but when I lower it nothing to bad happens. I've found everything games and feels better with TFAW 23 or TFAW 38 (but at 38 sometimes some games characters hair goes funny? like red dead 2 i think it was? maybe not too sure) TFAW is just an active window in general increasing active window doesnt hurt. Can anybody give me some better tips on how to RAM than the false garbage in the Ryzen RAM calculator app for samsung Bdie?
