According to the errata document EN285 (v1.14) August 14, 2023,
"Primary Boot Is Not Supported With eMMC Devices That Require CMD6 Busy Time Greater Than 1 ms".
At the same time , MTFC32GAZAQHD-IT is listed as one of the emmc device which is tested okay for being used as primary boot device. But according to its data sheet GENERIC_CMD6_TIME is found to be 100ms.
So my doubt here is
1. If 'GENERIC_CMD6_TIME' from emmc datasheet and 'CMD6 Busy Time' from errata refer to the same parameter ?
2. If so how is it possible to use MTFC32GAZAQHD-IT as primary boot device ?
3. If not where to find the 'CMD6 Busy Time' for MTFC32GAZAQHD-IT?
