General Discussions

[marenec]

So i replaced my gpu and psu because it was too weak for the rx5600xt i bought.

Pc on initial boot boots fine, but when i see the windows login screen it lags, turns off display and then cpu fan stops.

Fans in case will spin all the time and gpu too, but cpu fan turns on for a second and then stops and it keeps repeating it

I tried unplugging everything and then pluging it back and it doesnt work

I even cleaned the ram golden parts and reseated gpu, didnt work

PC: 

mb: gigabyte b450m h

cpu: ryzen 5 3600

cpu cooler: that rgb one that comes with r7 3700x

gpu: gigabyte rx5600xt

ram : hyperx fury 8gb 3200mhz (with xmp, it doesnt work even if i turn it off)

psu: silentiumpc vero l3 600W bronze( 89%)

case: gamemax aero rgb( comes with 4 rgb fans and fanhub)-

[cpurpe91]

From what I have seen, the B450 boards need a BIOS update for the Ryzen 3000 series to function. If you have a bootable USB drive with Windows installation media installed that you can use to test if it boots properly into that?

[marenec]

the bios is fine it came with the new bios preinstalled( i bought the mobo in july 2022 from alza.cz)

The pc was working normally with old gpu and psu( rx570 itx, modecom 500W) but as i replaced the gpu and psu it started to do those things. I bought the gpu from marketplace but it was working completely fine when i was testing it in sellers pc, and the psu is factory new from alza too.

I think its because of the fanhub rgb, it uses power from sata. And also when the cpu fan is off, the case fans spins normally. 

and sometimes it wont even boot, it just wont post, cpu fan wont spin but the gpu rgb will light and case fans will work normally