General Discussions

[burakkyazici]

When I selecting a material in Lumion 11 the program is crashing.I have done all the updates. My program is the original version. What should I do?,

Pc: 

AMD Ryzen 7 3700x

RX6800 Graphic Card

Asus TUF B550 Motherboard

32 GB RAM

750 Watt Psu

512 gb M2 Ssd

[ahmmedzubayer0012]

Any solution found?? 

I faced the same problem

[ArchKosi19]

1. Try set Global settings Preset to “STANDARD” it means every Radeon features turned off
2. and turn off tessellations in advance setting ( only for lumion applications just enough )
3. try to manual fan speed for more responsive with heat

not it’s working fine with fps improved 

let see if there is another issues later

[Ximenin]

Hi, planning to move from a 3070ti to a 6800xt. Main use is Lumion. Are all problems solved or should I stay with my nvidia?

[Bala9023]

pls has anyone figured a solution to that problem..im using an asus rug strix advantage addition...My laptop just shuts down when i start rendering, however it runs ok when done on battert power

[Thanveer_ks]

In my case, i disabled smart access memmory (SAM) from AMD radeon software from performance -tuning - disable SAM, and checked 3d grass and tadaa  it works then