Drivers & Software

[cabrizzio]

Hello.
I have a doubt and ask before 'breaking' something.
I have a RAID1 installed with two disks of 1 Tbyte each, of which I only have 500 Gb partitioned in each one; that is to say that there are 500 Gbytes left over (wasted) on each disk.
I ask: can I directly use software such as AOMEI Partition Assistant to bring the capacity of RAID1 up to the limit of 1 Tbytes??, or should I carry out a different procedure so that the RAID does not break?
Thanks for tips and suggestions.
Greetings to all,
Cesar.

[RyZEN1]

Hello, you can create additional RAID levels or create Volumes out of the left over Storage space from the 2 drives.

You should be able to manage the RAID1 partition using Windows Partition manager.

[cabrizzio]

Thank you very much for your reply.
I enclose a screen of my environment because I do not see the free 500 Mbyte partitions of each physical disk that make up the RAID-1.

Regards,

Cesar