cancel
Showing results for 
Search instead for 
Did you mean: 

Drivers & Software

Mezhone
Adept I

RAID 0 NVME fresh windows install 0x8007025D

Hello

I just got my Ryzen 7 7800X3D and a ASUS PRIME x670-P WIFI and 2x16GB G.Skill Z5 RAM.

I am unable to install windows on a RAID0 with 2x500GB Samsung Evo 970. I downloaded the latest BIOS version 1654 and the latest RAID drivers v 9.3.2.00158 and load them in in the order of rcbottom, rcraid and rccfg, and i have disabled CSM and enabled NVME Raid and set sata mode to RAID, have been able to create the RAIDs in RAIDXpert2 and i find the raids when i go through the windows installer and i am able to setup the partitions after loading the drivers but after initializing the install i get windows error 0x8007025D 

0 Likes
1 Solution
Mezhone
Adept I

Enabling CSM in bios did the trick for me, error code 0x8007045D and 0x8007025D with Raid0 .

View solution in original post

0 Likes
3 Replies
Mezhone
Adept I

Was unable to install windows with all i tried so i ran a Memtest86 and found 1 stick to be faulty, tried to install windows with just 1 stick that passed the first run, but i still keep getting 0x8007025D and 0x8007045D, also attempted to install windows 11 but to no success. 

Tried the raid drivers directly from ASUS and AMD but no dice.

I am now not sure what else i could have tried, i will be RMAing the ram and will see if it works when i get a new kit.

 

0 Likes
Mezhone
Adept I

Enabling CSM in bios did the trick for me, error code 0x8007045D and 0x8007025D with Raid0 .

0 Likes

Hi! I have the same problem with a MSI board.

Tried to enable CSM from BIOS, but the section of RAID configuration does not enable.

 

How did you do your raid configuration? Did you use the BIOS voice or create the RAID from RAIDXpert 2? Thank you.

0 Likes