cancel
Showing results for 
Search instead for 
Did you mean: 

PC Drivers & Software

MineatomTR
Adept II

No ReLive with RX 6600

I've got a RX 6600 paired with Ryzen 3 4300GE, 16gb of RAM and ReLive does not appear on the software, even after clean installing and updating. Any way to bring it back?noRelive.PNG

0 Likes
1 Solution
MineatomTR
Adept II

Only way to fix this was to disable the iGPU completely on the BIOS, no way around it. I hope AMD fixes this in the future.

View solution in original post

0 Likes
11 Replies

Compare the 6600 driver version in device manager with radeon settings system version.

They should match, and have you disabled the 4300ge graphics ?

 

Ryzen 5 5600x, B550 aorus pro ac, Hyper 212 black, 2 x 16gb F4-3600c16dgtzn kit, NM790 2TB, Nitro+RX6900XT, RM850, Win.10 Pro., LC27G55T..
0 Likes

In what world they must be same? 

You can try to check release date instead, though, i guess 

DimkaTsv_0-1662443158423.png

 

0 Likes

In 'Software & Driver Details'.

Ryzen 5 5600x, B550 aorus pro ac, Hyper 212 black, 2 x 16gb F4-3600c16dgtzn kit, NM790 2TB, Nitro+RX6900XT, RM850, Win.10 Pro., LC27G55T..
0 Likes

Device Manager dates match with the ones on the Radeon Software. However I did not go out of my way to disable 4300GE graphics, as the system only uses the dGPU unless I tell a software (such as Open Broadcaster Software) to encode specifically with the iGPU

0 Likes
Secuted
Journeyman III

I had the same problem, a few days ago, I installed the driver once more and it was solved.  it was curious that when I reinstalled it, it gave me a downgrade driver to version 22.8.2

0 Likes
triple-j
Adept I

I had to do a cleanup and reinstall of the drivers to solve this. Radeon 6800, about 5-6 months ago.

0 Likes

Did you use DDU to perform the cleanup? I got my RX 6600 about a month ago, I used DDU then installed the card, then the drivers. Should I DDU again in this case? I guess it's worth a try.

0 Likes

Ok well I finally lost all my patience and DDU'd, except RELIVE IS STILL NOT THERE BRUH

My advice, use another driver. I have a W6600, those new drivers are not very good. I use Enterprise 21.q3 or 21.10.2. You're using a RX 6600, i would recommend using 21.10.2. If the relive option is still not there, not sure whats going on.

That problem only shown up when i was using those custom drivers from guru3d. 

0 Likes

Hm, might give that a shot. I'll let you know if it works, thanks.

0 Likes
MineatomTR
Adept II

Only way to fix this was to disable the iGPU completely on the BIOS, no way around it. I hope AMD fixes this in the future.

0 Likes