Showing results for 
Search instead for 
Did you mean: 

Drivers & Software

Journeyman III

Linux amdgpu 19.30-838629 mouse laggy

I getting mouse very lag when using driver 19.30 on official website. This is my information:

Main: Gigabytes Z370-SLI

RAM: 16G

CPU: Intel i7 8700K

SSD: Crucial MX200 250GB

VGA: RX 5700

OS: Ubuntu 18.04.2 LTS x86_64

Kernel: 4.18.0-25-generic

DE: Unity:Unity7:ubuntu

Resolution: 2560x1440, 1920x1080

dmesg log:

[  324.719900] amdgpu: [powerplay] Failed to send message 0x0, response 0xfffffffb
[  324.719908] amdgpu: [powerplay] Attempt to get current RPM from SMC Failed!
[  324.720612] amdgpu: [powerplay] Failed to send message 0x36, response 0xfffffffb, param 0x0


log_file: /var/log/gpu-manager.log
last_boot_file: /var/lib/ubuntu-drivers-common/last_gfx_boot
new_boot_file: /var/lib/ubuntu-drivers-common/last_gfx_boot
can't access /run/u-d-c-nvidia-was-loaded file
can't access /opt/amdgpu-pro/bin/amdgpu-pro-px
Looking for nvidia modules in /lib/modules/4.18.0-25-generic/updates/dkms
Looking for amdgpu modules in /lib/modules/4.18.0-25-generic/updates/dkms
Found amdgpu module: amdgpu.ko
Is nvidia loaded? no
Was nvidia unloaded? no
Is nvidia blacklisted? no
Is intel loaded? no
Is radeon loaded? no
Is radeon blacklisted? yes
Is amdgpu loaded? yes
Is amdgpu blacklisted? no
Is amdgpu versioned? yes
Is amdgpu pro stack? yes
Is nouveau loaded? no
Is nouveau blacklisted? no
Is nvidia kernel module available? no
Is amdgpu kernel module available? yes
Vendor/Device Id: 1002:731f
BusID "PCI:3@0:0:0"
Is boot vga? yes
Found "/dev/dri/card0", driven by "amdgpu"
output 0:
output 1:
Number of connected outputs for /dev/dri/card0: 2
Skipping "/dev/dri/card0", driven by "amdgpu"
Skipping "/dev/dri/card0", driven by "amdgpu"
Skipping "/dev/dri/card0", driven by "amdgpu"
Does it require offloading? no
last cards number = 1
Has amd? yes
Has intel? no
Has nvidia? no
How many cards? 1
Has the system changed? No
Single card detected
Nothing to do

$ sudo sensors

Adapter: PCI adapter
vddgfx:       +0.78 V  
ERROR: Can't get value of subfeature fan1_input: I/O error
fan1:             N/A  (min =    0 RPM, max = 4950 RPM)
edge:             N/A  (crit = +80.0°C, hyst =  +0.0°C)
                       (emerg = +80.0°C)
junction:         N/A  (crit = +80.0°C, hyst =  +0.0°C)
                       (emerg = +80.0°C)
mem:              N/A  (crit = +80.0°C, hyst =  +0.0°C)
                       (emerg = +80.0°C)
power1:       29.00 W  (cap = 150.00 W)

0 Replies