cancel
Showing results for 
Search instead for 
Did you mean: 

Drivers & Software

TomasLSweden
Journeyman III

BSOD, Hangs and others with RX590

I am experiencing crashes everyday.

They are either VIDEO_TDR_ERROR in amdkmdag.sys, or THREAD_STUCK_INDEVICE_DRIVER in both dxgkrnl.sys and amdkmdag.sys, the later one happens simultaniously.

I am not gaming, it happens when it is iddling with only desktop, browsing, emailing etc.

DISM and sfc reports no violations or errors, checkdisk reports no errors

System is:

MSI MEG Z390 ACE
Intel I9-9900KS
Corsair DDR4-2132 (CMK16GX4M2K4000C19) 4 modules , in total 32GB
Graphics Radon RX590 8GB
OS-Disk WD Black SN750 NVMe SSD M2
OS W10 20H2 19042.844

THis seesm to happen even when I run att BIOS default, i.e no overclocking, no XMP etc.

Windows and all devicedrivers, BIOS etc is up to date with latest available versions, (No beta-versions though)

0 Likes
6 Replies
TomasLSweden
Journeyman III

Re: BSOD, Hangs and others with RX590

Bump

0 Likes
delevero
Adept III

Re: BSOD, Hangs and others with RX590

my advice.. check if your cpu coolers metal bracket is touching the round condensators in the side of the motherboard or your m.2 nvme harddisk in the top slot.. If your cpu metal mounting system is touching anything that could be the reason for instability.  ( i had this issue with my castle 365 v2 AIO water cooling system am4 mounting system.
Also maybe try another cpu cooler if you have one.

you can also try to take out your ram, cpu and gpu and insert it again.
Also check that the back of the motherboard is not touching the metal of your computer case or you dropped metal anywhere that can make an electric connection..
ALso try to remove all cables and insert them again.
And use two power cables from your power supply to your motherboard, and use two cpu power cables from power supply to top of the corner of your motherboard ( 4 pin and 8 pin )

ps. if you used metal liqued cpu paste then there is a risk you damaged your hardware.. never use that crap in a pc, just use ordinary arctic silver or other products.


0 Likes
TomasLSweden
Journeyman III

Re: BSOD, Hangs and others with RX590

Its a liquid cooler, so there is nothing that can interfere, as far as I can see, but will re-check.

Just ran a 10 hour memtest, with no errors.

Will check If I use two cables, beleive I do though.

 

Temperatures are ok, when it crashes, CPU and GPU both well under 50 degrees C (some 40+ or so)

0 Likes
liakoulee
Adept II

Re: BSOD, Hangs and others with RX590

Do you maybe have AIDA64 running in the background at all?

0 Likes
TomasLSweden
Journeyman III

Re: BSOD, Hangs and others with RX590

Nope, never heard of it.

0 Likes
TomasLSweden
Journeyman III

Re: BSOD, Hangs and others with RX590

Spoiler
This is weird:

DDUed the AMD drivers and it ran flawless for a couple of days with Windows default driver, Not on the screens natural resolution though, sin the driver cannot support the high resolution of my screen.

My screen has an native resolution of 5120x1440@120 Hz

THen I thought, maybee the card isnt up to the job, maybe the display resolution is to hig for the card, so I installed the Radeon driver again, lowered the resolution to match the previous driver,.

1 hour later the crash came, and it contiued to crash every hour.

So, obviously somethinge else is wrong.

My mother board is a MSI MEG Z390 ACE and I have 32G DDR4@4GHz installed.

THe CPU is an Intel I9-9900KS@5GHz on all cores.

I also have an LSI 9211-8i HBA installed.

Now the Radeon card is installed in slot 1 and the HBA in slot 4.

The HBA is an 8x card, so all 16x slots is running at 8x.

I moved the HBA to the third 16x slot, and all problems seems to be gone, it has ben running for 24 hours without crashing.

So obviously there is some sort of in-compability between the MB and the Radeon-card, that only manifests itself when AMD-drivers is installed
0 Likes