cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 

Drivers & Software

Marchise1992
Journeyman III
a week ago

B550 motherboard with hardware raid1

Hello, I have a B550 motherboard with a raid1 created in the bios and I'm currently using also Raidxpert2.

I need to disconnect the hard drives to connect some spare drives.

How can I proceed to do it without loosing the data on my raid 1 drives?

If I disconnect the drives, hide the array (which will go offline), use the new hard drives and then connect the raid 1 drives back, are they going to work fine?

Thanks

 

0 Likes
2 Replies
FunkZ
Paragon
a week ago

First thing is make a backup copy of your data before making any changes.

The RAID1 array drives can be read independently in any system even without the use of RAID - ie. you've got 2 identical copies of your data.

However it can be tricky when reinstating the drives where it may not recognize them as a RAID1 array but instead as JBOD and the mirror must be reconfigured.

Ryzen R7 5700X | B550 Gaming X | 2x16GB G.Skill 3600 | Radeon RX 7900XT
0 Likes
Marchise1992
In response to FunkZ
Journeyman III
Sunday

It's not like that. At least not with AMD Raid (it is on my intel system). If I connect the drives to another pc they can't see the data. That being said what I done is:

1) Made a backup of the whole drives on a third drive.

2) Turned off the pc and disconnected both hard drives, the raid 1 went offline, not even visible from bios.

3) Turned off the pc and connected again both hard drives, the raid 1 was visible again without issues.

 

0 Likes