Hi,
All crashes with my RX 7900 XTX Seem to be related to the Junction Point Temps. I get a good FPS @ 4K HDR with and without MS Assited HDR. However I have noticed that when I mount the GPU Virtically, It seems to increase temps all around by 3 to 5 degrees C. I fear I have purchased a good card as I'm getting 60-120 FPS in 7D2D with all the quality settings at max but by default the card does not perform properly. Sometimes the FPS drops to 20-30 and that is unacceptable as this card was advetised to do more at these settings. Please feel free to help me if you can as I'm thinking of returning this card and jumping back to Nvidia. I would rather keep the card but it needs better cooling to run even close to the advertised GPU and Clock Frequences. What Can I do? I would mount an AIO on the card but I will not pay for it my self. The Frequencies are evendently ment to be at : GPU:2935Mhz boost clock MEM:5000 Mhz. I noticed since the last driver update the default clocks have changed and the core is higher. From 2935 Boost to 2950 boost. The default has always been around 2300-2400Mhz boosting to around 2930Mhz. I should mention this is a Tachi Card and has the modifier switches on it.
What do you guy's think? Should I aquire a water cooler for this or just bite the bullet and jump ship?
PS. I did have a berage of three Cold crashes in a row at some point in the last 3-4 weeks so maybe this is an AI driver hack from hackers from some backwaters somewere (NIVIDIA MICROSOFT.... etc.)
