First I translated your Original Post into English since this is an English Only Forum:
You might want to try and post this thread at AMD Forum's Drivers and Software Forum since it concerns Ryzen Master issues.
this is the error that the StoreMI installer application issues
I didn't know you were talking about STOREMI.
Okay at this point I can' really help you with STOREMI. I have read about it in the past but I really know enough data to help you troubleshoot your issue.
STOREMI is similar to RAID. It uses two drives to run faster together.
Are you sure you downloaded the correct software:
click on "USER GUIDE" to show you how to correctly install STOREMI if that is what you wanted to do from the beginning.
From USER GUIDE:
Chapter 1 Introduction
AMD StoreMI technology is a powerful tool for the PC enthusiasts who want to improve load
time, boot time, file management, or system responsiveness. It has the following features:
• Accepts HDD and SSD pairings of any capacity
• Automatically pairs your most-used files with an SSD cache for peak performance
• The StoreMI caching algorithm prioritizes and caches more frequently accessed files when the
cache is full
AMD StoreMI technology has a new algorithm that makes it simple to use. The StoreMI
configuration replicates your most-used files to an SSD of your choice, leaving the original copy
intact. The software seamlessly redirects Windows and your applications to use the faster mirrored
copy. Even if the SSD cache is removed or disabled, all your files remain intact on the hard drive
Chapter 2 System Configuration
Requirements
2.1 Product Support
For more information, refer to the Product Support section of the official StoreMI website
(https://www.amd.com/en/technologies/store-mi).
2.2 Operating System
Windows 10 x64 May 2019 Update (build 18362) or later
2.3 Storage Devices
• At least one rotational HDD of any capacity. The HDD must be connected to a SATA port
provided in the AMD processor or chipset.
• At least one unformatted, uninitialized, unallocated SATA or NVMe SSD for storage
acceleration. If using a brand new, unused SSD, simply plug the SSD into the system. Most
new SSDs will offer a default name to identify it in the AMD StoreMI Cache device menu. A
used SSD can be re-used as an AMD StoreMI cache device. However, all the vital data must
be backed up by the user and any existing partitions/volumes must be deleted before
proceeding.
• The former AMD StoreMI tiering software must not be installed.
• The system should not be configured for RAID storage.
• The maximum drive count is 16.
• A few systems will require additional NVMe® to be connected to the system. The SATA SSD
on the board will not be able to fulfil the minimum 2 storage controller criteria for StoreMI to
install and function.
• The storage devices connected to the third-party SATA AHCI controller ports are not
supported by StoreMI. You must connect the storage devices to AMD specific SATA AHCI
controller ports for StoreMI to support it
NOTE: You seem to be posting more than one issue in your thread.
1- concerning AMD Adrenaline Driver
2- Ryzen Master not showing correctly
3- Now STOREMI not installing
I realize that English is not your native language and it is difficult to communicate your thoughts but to prevent confusion you need to first fix one issue before going on to another problem.
So do you want to continue with Ryzen Master, Adrenaline Driver or STOREMI first?
