So I just made my pc yesterday. I started hardware monitor and it was showing voltage as 1.3-1.48. It was fluctuating a lot and it is higher than 1.45 so I went into bios and tried to input it manually even though in bios it shows the voltage is 1.208. I changed it to 1.275 and when i checked hardware monitor again, all my cpu cores were clocked at 2.2 i ran cine bench and now i dont know what to do. I had to do a cmos to reset bios and i checked again in hardware monitor its back at 1,4ish v. Someone please help. Thanks.