Is there a Linux driver for the Radeon HD 6310 that works w/ the APP/OpenCP?
does not appear to have a Linux driver under Desktop->HD->6xxx.
This has potential
shows pci device ID 1002:9802, which is what is needed.
But I do not see
when stating X w/ loaded fglrc. Do I need xorg.conf? aitconfig cannot create it w/o /dev/ati/*.
try this minimal config from http://wiki.cchtml.com/index.php/Ubuntu_Maverick_Installation_Guide#Generic_Config
Section "Device" Identifier "ATI radeon 6310" Driver "fglrx"EndSection
I had to add
to get X going. But then, a box pops up (bottom right): "AMD Unsupported hardware"
/dev/ati/card0 is there
glxinfo produces lots of output
But aticonfig complains: "No supported adapters detected"
I need a new binary for aticonfig (as it's only delivered as binary). And possibly an update on some module (as the pop-up box seems to come for X11).
Can APP/OpenCL already work on this?
And a snippet from Xorg.0.log:
[ 909.507] (II) ATI Proprietary Linux Driver Build Date: Nov 25 2010 21:36:26[ 909.507] (--) using VT number 7[ 909.512] (WW) Falling back to old probe method for fglrx[ 909.521] (II) Loading PCS database from /etc/ati/amdpcsdb[ 909.523] (--) Chipset Supported AMD Graphics Processor (0x9802) found[ 909.523] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:1:1) found
Looks like 9802 is not fully integrated into the 5xxx driver, maybe?
Any chance to get a dev driver for 2.3?
I'm less interested in X, what matters is OpenCL on the 6310.
AMD releases new device drivers on a regular basis. Although most probably 6xxx devices will get support but it cannot be said for sure.
Maybe someone from driver team can answer it better.
I recently changed the HD5770 to HD6950, the system is working properly without reinstalling the driver ...I'm using Ubuntu 10.10 x86_64, driver version 10.12 SDK v2.3
Got it working(OpenCL and X11), turns out AMD posted the Linux driver for HD 6XXX today :-)
Here are some rough notes for Fedora 14:
#get ATI driver for E350/Zacate Radeon HD 6310support.amd.com Desktop->HD Radeon->6XXX driver->x86_64 Linuxsh ati-driver-installer-x11-1-x86.x86_64.runcd /lib/modules/fglrxsh make.install.shmodprobe fglrxinit 3killall -9 Xorgaticonfig --initializeinit 5#get AMD APP / ATI Stream APItar xzf ati-stream-sdk-v2.3-lnx64.tgzcd ati-stream-sdk-v2.3-lnx64#edit make/openclsdkdefs.mk: OpenCL -> OpenCL GL GLUmakeexport LD_LIBRARY_PATH=`pwd`/lib/x86_64execstack -c lib/x86_64/libatiocl64.socd samples/opencl/bin/x86_64./MatrixMultiplication
Update: Shutdown/suspend to RAM/suspend to disk do not work.
Problem: When Xorg gets a TERM signal, fglrx causes Xorg not to terminate until it crashes (on a stack overflow?) after 30 seconds or so.
Solution: need a driver update (help, AMD!)
Work-around: manually do this
login as root
killall -9 Xorg
(The fglrx module must be unloaded first!!!)
Completely off-topic but curious about this
fmuelle2: If you get some time, can you post some benchmark numbers? I am particularly interested in how fast you can copy memory from CPU space to GPU space. Also, some other timings from the OpenCL or CAL SDks will be welcome.
Thanks in advance!
Retrieving data ...