PC Processors

[jauster]

Hello all,

I just finished to build my first PC. I could install windows on it, do all the updates, etc....

My problem is that i can't let the VDDCR CPU Voltage Override set to "Auto" in the Bios, since it causes my PC to crash. I still can access the bios though.
I tried then to reduce this to 1.20V. PC is still crashing, but not just after the POST, but after logging into Windows.
I found out that i could log to windows and use my PC in a normal way when i'm setting this to 1.040V.

Have I done something wrong ? Any Ideas were it could come from, and how to fix it ?

My specs :
Ryzen 7 3700x
Asus X570 Tuf Gaming plus wifi
Straight power 11 650w 80 plus gold
Vengeance LPX 2x8 gb 3200 Mhz
Windows 10 Pro

Thanks in advance for your help

[qbtheslayer]

Is your CPU cooler making proper contact?  With that super low voltage, what are your temps like?  Something is definitely wrong since I have basically the same board and CPU and Auto works perfectly fine.

I also notice you are on the latest BIOS, that's good...  I suggest you load the BIOS defaults and start again...  also note that if you have any previously saved profiles, they will no longer work with that new BIOS.

QB

[jauster]

Hello, thanks for your answer. This are my temps

I checked if i had last chipset and bios update, and i had them. Tried to load defaults settings, and still can't start the PC with Auto voltage (BSOD > IRQL NOT LESS OR EQUAL)

Any other ideas ? 

Thanks