Error:
A corrected hardware error has occurred.
Reported by component: Processor Core
Error Source: Unknown Error Source
Error Type: Bus/Interconnect Error
Processor APIC ID: 0
Happens with 2 different CPU's, 5600X and 5900X
Looking for some guru out there who's willing to help get the best out of my system, especially to get rid of the errors and get the CPU and RAM to run smooth.
I'm not good at all when it comes to RAM, but after reading some forums I understand is the RAM timings/Voltage and how it works with CPU that could trigger the WHEA Logger Errors. So I'm looking for help on how to set them right in BIOS - Voltage, Timings, etc. Thanks in advance!
All the drivers&bios are up to date.
Both CPU and GPU are water cooled so I excluded temps out.
PSU is a 1000W.
Full system specs - from a CPU-Z bench:
CPU Name
AMD Ryzen 9 5900X 12-Core Processor
Threading
1 CPU - 12 Core - 24 Threads
Frequency
4515.85 MHz (45.25 * 99.8 MHz) - Uncore: 998 MHz
Multiplier
Current: 45.25
Architecture
Vermeer / Stepping: B0 / Technology: 7 nm
CPUID / Ext.
F.1.0 / 19.21
IA Extensions
MMX(+), SSE, SSE2, SSE3, SSSE3, SSE4.1, SSE4.2, SSE4A, x86-64, AMD-V, AES, AVX, AVX2, FMA3, SHA
Caches
L1D : 32 KB / L2 : 512 KB / L3 : 32768 KB
Caches Assoc.
L1D : 8-way / L2 : 8-way / L3 : 16-way
Microcode
Rev. 0xA201016
TDP / Vcore
105 Watts / 1.344 Volts
Temperature
53 °C / 127 °F
Type
Retail
Cores Frequencies
#00: 4515.85 MHz #01: 4515.85 MHz #02: 4515.85 MHz #03: 4540.80 MHz
#04: 4515.85 MHz #05: 4515.85 MHz #06: 4540.80 MHz #07: 4540.80 MHz
#08: 4540.80 MHz #09: 4515.85 MHz #10: 4515.85 MHz #11: 4540.80 MHz
#04: 4515.85 MHz #05: 4515.85 MHz #06: 4540.80 MHz #07: 4540.80 MHz
#08: 4540.80 MHz #09: 4515.85 MHz #10: 4515.85 MHz #11: 4540.80 MHz
Motherboard
Model
Gigabyte B550 AORUS ELITE AX V2
Socket
Socket AM4 (1331)
North Bridge
AMD Ryzen SOC rev 00
South Bridge
AMD B550 rev 51
BIOS
American Megatrends International LLC. F14 (11/01/2021)
Memory (RAM)
Total Size
32768 MB
Type
Dual Channel (128 bit) DDR4-SDRAM
Frequency
1996 MHz (DDR4-3992) - Ratio 3:60
Timings
18-19-19-39-93-1 (tCAS-tRCD-tRP-tRAS-tRC-tCR)
Slot #1 Module
Crucial Technology 16384 MB (DDR4-2666) - XMP 2.0 - P/N: BLM16G40C18U4B.M8FB1
Slot #2 Module
Crucial Technology 16384 MB (DDR4-2666) - XMP 2.0 - P/N: BLM16G40C18U4B.M8FB1
Graphic Card (GPU)
GPU Type
AMD Radeon RX 6900 XT (Navi 21 XTX) @ 500 MHz
GPU Brand
Advanced Micro Devices Inc. (AMD
GPU VRAM
16368 MB @ 192 MHz
Storage (HDD/SSD)
Model #1 Name
Samsung SSD 970 EVO Plus 1TB (FW: 2B2QEXM7)
Model #1 Capacity
931.5 GiB (~1000 GB)
Model #1 Type
Fixed, SSD - Bus: NVMe (17)
Model #2 Name
Samsung SSD 970 EVO Plus 2TB (FW: 2B2QEXM7)
Model #2 Capacity
1863.0 GiB (~2000 GB)
Model #2 Type
Fixed, SSD - Bus: NVMe (17)
Display
Screen #1
Dell Computer Dell AW2721D (DELA179)
Screen #1 Spec
27.3 inches (69.3 cm) / 2560 x 1440 pixels @ 1-240 Hz
Update:
After disabling XMP in Bios (which was turned on - from 3600 to 4000) the error is gone so it's abought Ram timings/voltage/etc as I thought. I would appreciate any help on how to get XMP ON and no errors.
