PC Processors

[justAguy51]

I need help because whenever I install my new cpu (amd ryzen 5 5600) my pc shuts off in like 10 sec. , my motherboard is

ASrock AB350m pro4 and it should be compatible with the new 7.20 bios which I have but still nothing changed please whoever knows what to do reply.

[BigAl01 · Accepted solution]

Please post all relevant system specs, like PSU, old CPU, memory, Windows version, etc.

Does your PC make it into the BIOS if you press the delete or F2 key?  Is it stable in the BIOS?  It could be that you might need a chipset driver update.  Or, there might be a setting in your BIOS causing issues, like fTPM settings.

[vialli100 · Accepted solution]

Check you haven't bent any pins on the CPU too..

[BigAl01 · Accepted solution]

Please post all relevant system specs, like PSU, old CPU, memory, Windows version, etc.

Does your PC make it into the BIOS if you press the delete or F2 key?  Is it stable in the BIOS?  It could be that you might need a chipset driver update.  Or, there might be a setting in your BIOS causing issues, like fTPM settings.

[justAguy51]

no i can't even get into bios my old CPU is amd ryzen 3 1200, PSU FSP Fortron HYDRO 500w, windows 10 (version 21H1, not sure if that helps) HDD 931 GB and SSD 222GB.

and thank you for taking interest

[vialli100 · Accepted solution]

Check you haven't bent any pins on the CPU too..

[justAguy51]

oh it seems that two pins are bent a little does it have sense to try and straighten them?

[red5 · Accepted solution]

be very careful messing with the pins.  A razor blade can work well to fit between the pins to bend them back into place

[justAguy51]

alright guys thank you all so much it's finnaly working, you were very helpful .

[vialli100]

Can you mark my post a solution please?