Hi, the matter have been discussed in other variations but would just like to confirm one thing to begin with.
Is running PBO2.0 without voltage adjustment always supposed to be stable on AMD Ryzen 5000?
I've been running corecycler with stock voltages and Core 2 always gets errors. Was able to run it for a 30min run once at 0 voltage before it gave an error, but its reoccuring whilst all other seem to be behaving properly? In my world it should always be stable at stock settings for PBO, but then start to show errors when dropping voltage or increasing the MHz-offset? It is kind of disturbing that its the 2nd highest performing core that shows this error.
MOBO: MSI B450 Tomahawk MAX (Running latest firmware)
Memory: Crucial Ballistics 3600 (Running in XMP-profile, done memtest and windows memory test without errors)
CPU: 5800X (Bought ~10 days ago)
Read some tips in the previous threads and I have not tried flashing bios or clearing CMOS so will try this as well to just ensure that no other factors intervene; I'm very open to any other suggestions!
