PC Graphics

[Zer0DG3]

yo i recently bought a nitro+ 6700xt, i was gonna undervolt it, however the max power limit slider i have is to 30. According to videos and posts it should be 50? plus at 30 power limit, i cant push the voltage lower than 1125. It crashes on it. i was wondering if anyone can help me with it, would be much appreciated. thankyou.

[goodplay]

Check in GPU-Z, Advanced details. May show what power limits are.

My card is same in vbios, gpuz & tuning option (-10 +15).

[DimkaTsv]

Min and max values for power limits are set in VBIOS.
Technically you can try to override them with setting base power limit level in MorePowerTool. Like setting 250W base instead of 230W (with corresponding EDC change), but not much more

And about lowering voltage. If card doesn't go below mark, then it just doesn't. Like my 6750XT cannot go below 1140. Actual voltage is already much lower at stock frequencies though. Unless you are overclocking actual voltage will always be lower than what you set.