Hi folks,
I'm hoping someone will be able to assist me with my issue as its ongoing and stressing me out big time, I built a PC back in September/October time, did the build on PCPartPicker to ensure all was compatible and double checked my PSU was compatible with the GPU and all is fine on that front. I get the system built, powered up, etc. All seems fine, running a dual monitor set up and monitor #1 starts acting up, flashing green and pink, going on and off, but monitor #2 seems fine. I start the process of elimination to find out what could actually be the problem here and do the following.
- Unplug the entire system, cables all out, leave it for a day and come back in the evening to plug everything in and see what the deal is, problem persists, albeit an hour or two after the system is running again.
- I run the monitors singularly, problem persists.
- I try and run the monitors independently using both HDMI & DP to see if the DP was the issue, it was not and the problem persisted with both monitors on both HDMI and DP using all three DP inputs on the GPU.
- Drivers/Software/Firmware all up to date, other software on system is also up to date, no luck here.
PC specs are:
CPU: AMD Ryzen 5950X
Motherboard: Gigabyte Aorus Pro AX
AIO: NZXT X73
RAM: Corsair Vengeance LPX 3000Mhz 64GB (2X32GB)
GPU: Asus RX 6800 TUF
M2 #1: Samsung 980 Pro M2 512GB (OS & General Software)
M2 #2: Samsung 980 Pro M2 1TB (Games & Specific Software)
HDD #1: Seagate 3TB HDD (General Storage)
HDD #2: Seagate 3TB HDD (General Storage)
Case: Corsair 5000D Airflow
PSU: BeQuiet Straight Power 1000W Platinum.
Thank you in advance for any assistance.
