I installed a videocard PowerColor Red Dragon AMD Radeon RX 550 OC, 4GB, GDDR5 - AXRX 550 4GBD5-DHA/OC in my PC, but when I type this command to get its setups in linux: lspci -v -s 01:00.0, I get the wrong values of memory, that it should be 4GB, but instead it, I get 256MB. Could we help me? I use Ubuntu 18.04. The output of the command as root is below:
fulano@fulano: # lspci -v -s 01:00.0
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Baffin [Radeon RX 550 640SP / RX 560/560X] (rev ff) (prog-if 00 [VGA controller])
Subsystem: Tul Corporation / PowerColor Baffin [Radeon RX 560]
Flags: bus master, fast devsel, latency 0, IRQ 28
Memory at e0000000 (64-bit, prefetchable) [size=256M] #My videocard has 4GB of memory, not 256MB
Memory at f0000000 (64-bit, prefetchable) [size=2M]
I/O ports at e000 [size=256]
Memory at f7c00000 (32-bit, non-prefetchable) [size=256K]
Expansion ROM at 000c0000 [disabled] [size=128K]
Capabilities: [48] Vendor Specific Information: Len=08 <?>
Capabilities: [50] Power Management version 3
Capabilities: [58] Express Legacy Endpoint, MSI 00
Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Capabilities: [100] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
Capabilities: [150] Advanced Error Reporting
Capabilities: [200] #15
Capabilities: [270] #19
Capabilities: [2b0] Address Translation Service (ATS)
Capabilities: [2c0] Page Request Interface (PRI)
Capabilities: [2d0] Process Address Space ID (PASID)
Capabilities: [320] Latency Tolerance Reporting
Capabilities: [328] Alternative Routing-ID Interpretation (ARI)
Capabilities: [370] L1 PM Substates
Kernel driver in use: amdgpu
Kernel modules: amdgpu