cancel
Showing results for 
Search instead for 
Did you mean: 

PC Graphics

gto_pro
Elite

Having problems with the Gpu fans they keep ramping up and for some reason the tunning setting reset

Helo so i have problems with my sapphire 7700xt s fans they keep ramping up for a minute then slowing down then ramping up again at first i tought it was because of the fan control software that it was interfering with the gpu and i removed it from the aplication it worked that day then i dono the gpu drivers reset i was always keeping the gpu tunning setting to default then when i opened the pc today the tunning was set to custom also i never noticed that Zero rpm option im pretty sure thats what causing the fans to do that is that a new thing that they added cause its not working good for me.

0 Likes
1 Solution
FunkZ
Grandmaster

ZeroRPM allows the graphics card fans to turn off completely when the card has little to no utilization. This feature is enabled as part of the Default profile on 6000 and 7000 series cards.

When you go from a desktop application to a game or benchmark that utilizes the graphics card then the fans will turn on and use the Default fan curve.

If the profile is set to Custom the same features are available it just allows manual control.

Ryzen R7 5700X | B550 Gaming X | 2x16GB G.Skill 3600 | Radeon RX 7900XT
Ryzen R7 5700G | B550 Gaming X | 2x8GB G.Skill 4000 | Radeon Vega 8 IGP
Ryzen R5 5600 | B550 Gaming Edge | 4x8GB G.Skill 3600 | Radeon RX 6800XT

View solution in original post

0 Likes
4 Replies
FunkZ
Grandmaster

ZeroRPM allows the graphics card fans to turn off completely when the card has little to no utilization. This feature is enabled as part of the Default profile on 6000 and 7000 series cards.

When you go from a desktop application to a game or benchmark that utilizes the graphics card then the fans will turn on and use the Default fan curve.

If the profile is set to Custom the same features are available it just allows manual control.

Ryzen R7 5700X | B550 Gaming X | 2x16GB G.Skill 3600 | Radeon RX 7900XT
Ryzen R7 5700G | B550 Gaming X | 2x8GB G.Skill 4000 | Radeon Vega 8 IGP
Ryzen R5 5600 | B550 Gaming Edge | 4x8GB G.Skill 3600 | Radeon RX 6800XT
0 Likes

the fans where ramping up to keep the gpu under 50c and i dono why was it doing that cause before it could go to 62+ and i would not hear the fans

0 Likes

My 7900XT also turns on the fans above 50°C however they are not audible at such low rpm.

I have to generate a graphics load, such as GPU-Z render test, to even make it go above 50°C.

If you're not happy with the fan noise level of the Default Adrenalin profile you can either try another profile such as Quiet, Balanced or Custom or download your vendor software Sapphire TriXX to adjust your card's fan speed.

FunkZ_1-1725907475344.png

FunkZ_0-1725907377287.png

 

Ryzen R7 5700X | B550 Gaming X | 2x16GB G.Skill 3600 | Radeon RX 7900XT
Ryzen R7 5700G | B550 Gaming X | 2x8GB G.Skill 4000 | Radeon Vega 8 IGP
Ryzen R5 5600 | B550 Gaming Edge | 4x8GB G.Skill 3600 | Radeon RX 6800XT
0 Likes

the fans where going like 100% to keep it under 50c for no reason i have set the tunning to default and it doesnt do that anymore today but im sure if i open the pc tomorow its gona ramp them up again for honkai star rail game that berely uses resources.

 

 

 

i will post some pictures if it happens again tomorow right now its working fine but the fans would ramp up to 2000 rpm before the gpu even reaches 50c so below 50c the fans should of not started at all

0 Likes