PC Graphics

[Snowwolfboi]

Hi guys what settings on amd adrenaline 22.5.1 is best for fps and quality for my Asus dual rx 6600 xt. Please send some good fan curves for good cooling but i still want that 0 rpm mode when it dont need cooling 

[CodySlay]

I personally OCed my 6600XT to 6650XT stock freq, minus the voltage as it can't go over 1.150 while 6650XT has 1.200.  It's a small OC.

Besides that I used MorePowerTool to change the ZeroRPM target temperatutes. I've found it going on and off quite often on my RedDevil.

For fan curve I'm very conservative as I have a fat cooler. So everything under 70°C is under 42% PWM ~1600RPM (this depends from card to card)

When I get home I'll post a screenshot, if I can, and edit for accuracy.

[CodySlay]

You could also do 2352MHz for min freq, this way GPU-Z will show clocks exactly like 6650XT, both for GPU clock as for Boost clock.
But I don't mind it underclocking while not in intense scenarios so I left it to 500MHz

[Snowwolfboi]

So u overclocked the max frequency to base rx 6650 xt?? And why vram clock at 2190MHz only?? And my p1 is stuck 30 fan speed cant get it to 25

[CodySlay]

25% PWM fan speed is obtained through tweaking the SPPT driver registry (see MorePowerTool software). And I used the manual fan curve so it actually changes with temperature (automatic curve is more conservative and triggers only when you surpass target temperature - eg 87°C hotspot)
Yeah, I basically emulated 6650xt values such that the frequency reported by GPU-Z were the same as what you find on TechPowerUp specification page.