Hello,
I installed two Sata HDD Drives in Raid 0, so I had to switch from AHCI to Raid. Therefore I did a clean install with the latest windows versions and raid drivers (2.20.1937) using RAID_NVMe_DID.
Every single time I end up with a clean systems randomly freezing with 100% Disk usage (no data throughput) on my SATA SSD drive (and sometimes also on my NVMe drive). I did several reinstalls, but the problem persists, even after disabling the usual suspects: superfetch, bits, windows search, ...
The problems started with switching to raid - as my windows was up to date before while running AHCI, I suppose there is a problem with storage management caused by the RAID drivers. My Device Manager shows: 2x AMD-RAID Bottom Device + 2x AMD-RAID Controller [storport]. Is that normal?
Thanks for your help, Werner
System:
OS Name Microsoft Windows 11 Pro
Version 10.0.22631 Build 22631
BIOS Mode UEFI
BIOS Version/Date American Megatrends International, LLC. 1.H1, 15/05/2023
SMBIOS Version 2.8
Embedded Controller Version 255.255
BaseBoard Manufacturer Micro-Star International Co., Ltd.
BaseBoard Version 1.0
System Model MS-7B85
BaseBoard Product B450 GAMING PRO CARBON AC (MS-7B85)
Processor AMD Ryzen 5 5600 6-Core Processor, 3501 Mhz, 6 Core(s), 12 Logical Processor(s)
RAM: 32 GB
Graphics: KFA RTX 3070
Disks: All 4 Disks are ok (crystal disk)
System Disk: CT240BX200SSD1 : 240,0 GB
Storage-NVMe: CT2000P2SSD8
Storage-HDD: 2x WDC WD20EARS - RAID 0
