I tried to switch AHCI controller to RAID mode and made array of disks. MSI B450, W11 PRO.
But after reboot got BSOD INACESSIBLE_BOOT_DEVICE
How to fix this:
1. Copy AMD SATA RAID driver unpacked to flash drive that possible to access from bios as disk volume. Every folder contain .sys, .inf and .cat files.
RAID_SATA\
\rcbottom
\rcraid
\rccfg
2. Repeat startup attempts until prompted to enter the recovery console.
3. Enter recovery console.
4. Get name of disk with drivers by diskpart utility:
diskpart
list volume
exit
this enter to diskpart command line, return list of volumes and return to repair console. In my list name of flash drive is C:
5. change disk and folder to RAID_SATA:
C:
cd \raid_sata
6. Use drvload, to get acess to RAID volumes:
Drvload rcbottom\rcbottom.inf
Drvload rcraid\rcraid.inf
Drvload rccfg\rccfg.inf
7. Again start diskpart to refresh list of volumes:
diskpart
recover
list volume
exit
After this list extended to existing raid volumes, old Windows installation volume get disk name J:
8. Time to use DISM to add drivers as OEM:
Dism /Image:J:\ /Add-Driver /Driver:rcbottom\rcbottom.inf
Dism /Image:J:\ /Add-Driver /Driver:rcraid\rcraid.inf
Dism /Image:J:\ /Add-Driver /Driver:rccfg\rccfg.inf
Succesifully installed drivers adds to image as "Oemxx.inf".
9. After reboot Windows sucessifully login to desktop.
