I searched the whole Internet, tried everything I could. I have an asus hd 6850 1gb graphics card. But there is no load on it and the built-in graphics of the intel duo quad q9300 processor works. I know how to switch from internal to external, but this requires the 'POWER' section in the amd catalyst program, but I just don't have it. SOMEONE HELP, ADMINS, SO THAT YOU BURN IN HELL!
First your HD 6850 is a very old Non-Supported AMD GPU card.
If you want to assign the GPU card to run specific apps or programs you need to go to Windows Settings - Graphic and select the app you want to run with the GPU card then select "HIGH PERFORMANCE" which is your GPU card and not your Intel IGPU.
Here are the last 2 AMD drivers for your HD 6850 GPU Card: https://www.amd.com/en/support/graphics/amd-radeon-hd/amd-radeon-hd-6000-series/amd-radeon-hd-6850
I've done this setup before and now I've done it again, nothing has changed. I don't even have a video card displayed in the task manager, although the video card is displayed in the device manager in the video adapter section.
Have you made the change in motherboard bios settings to initialize the gpu as display from.
The cpu has no graphics, so must have a motherboard graphics chip.
I checked the bios, the only setting that is there is the initiate graphic adapter - peg/pci or pci/peg. I tried both, nothing changed, I posted below, it turns out I only use 10/1000mb, I don't know what's wrong with that
Only 10/1000 MB is used. I cleaned the video card inside and changed the thermal paste, nothing has changed.
A16 year old CPU and a 12 Year old GPU .lmao
And you are complaining The "ADMINS SHOULD BURN IN HELL"
You could Buy the Cheapest setup today and Have 10 times the Power.