HELP ME!! TT
Hello, I'm new to the AMD world and I'm having some difficulty configuring my system.
I assembled everything and correctly installed (or at least I think) all the component drivers
but after a few minutes of playing or in any case after some time the pc crashes and gives me a
bsod or at best it restarts and that's it.
I tried everything I don't know what to do anymore!
Below is the configuration:
AMD AMD RyzenTM 5 7600X Processeur, 6 C?urs/12 Threads
MOBO ASUS ROG STRIX B650-A GAMING WIFI Scheda Madre Gaming ATX, AMD
AIO DEEP COOL CASTLE 240EX A-RGB Bianco, AIO CPU
VGA Zotac Gaming Geforce Rtx 3070 Ti Trinity Oc Nvidia 8 Gb Gddr6X
RAM Kingston Fury Beast DDR5 RGB 16GB (2x8GB) 5600MT/s DDR5 CL40 DIMM
PSU Corsair RM850x 80 PLUS Gold Alimentatore 850 Watt AT
this is what appen if i run a p95 test after a few seconds:
[Mon Jan 9 19:39:13 2023]
FATAL ERROR: Rounding was 0.4989266103, expected less than 0.4
Hardware failure detected running 960K FFT size, consult stress.txt file.
FATAL ERROR: Rounding was 0.5, expected less than 0.4
Hardware failure detected running 960K FFT size, consult stress.txt file.
FATAL ERROR: Rounding was 0.4998941654, expected less than 0.
Hardware failure detected running 960K FFT size, consult stress.txt file.
FATAL ERROR: Rounding was 0.4999733406, expected less than 0.4
Hardware failure detected running 960K FFT size, consult stress.txt file.
FATAL ERROR: Rounding was 0.499998234, expected less than 0.4
Hardware failure detected running 960K FFT size, consult stress.txt file.
FATAL ERROR: Rounding was 0.4998937605, expected less than 0.4
Hardware failure detected running 960K FFT size, consult stress.txt file.
what does the stress.txt file say? it says to consult that
This tech website give some very good troubleshooting tips on Prime95 "Fatal Error Round" Error that you are experiencing: https://appuals.com/prime95-fatal-error-rounding/
Try running OCCT CPU, GPU, & PSU Stress test and see if you get similar results. Keep a close eye on Temperatures, Fan Speeds, & PSU Outputs ( All PSU Outputs should be within 5% Tolerances).