I have an older 2k monitor that only has vga and DVI-d (dual) and I have a newer video card rx6600.
(This used to work on a old video card run DVI-d to DVI-d until an upgrade and the old driver became incompatible and the monitor would only display in 1900x1200)
I need to get a connection from a HDMI on the video card to a DVI-d port on the monitor and have this display at 2560x1440.
How can I do this. I have seen some suggestions that you get a passive adapter and then set a custom resolution. Will this work? What would the custom resolution need to be if this can work?
I have an adaptor that will passively take the HDMI to DVI-d and I was hoping I could create a custom resolution to drive the 2k resolution.
When I try and create a custom resolution I get an error
![tkman_0-1663644848629.png tkman_0-1663644848629.png](/t5/image/serverpage/image-id/73625iA6CD82615BDE3108/image-size/medium?v=v2&px=400)
Here is what I tried in the custom resolution. I have experimented with various settings and have not been able to get it to work.
![tkman_1-1663644896122.png tkman_1-1663644896122.png](/t5/image/serverpage/image-id/73626iE4CA6FB5A2FFB11E/image-size/medium?v=v2&px=400)