cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 

General Discussions

mathias18
Journeyman III
Sunday

I have a ryzen 3200g and a Quadro P600 but the Quadro doesn't give an image!

They gave me a Quadro p600 and I wanted to add it to my components, I have a Ryzen 3200g, B450M vdh max pro, 16 Gb Ram, 1 TB.
When I connect the minidisplayport connector to the quadro and disconnect the HDMI from the motherboard, there is no image, I have done everything, updating bios, drivers, windows, but nothing, any solution?

0 Likes
2 Replies
johnnyenglish
Big Boss
Monday

Could be the card itself, use the iGPU and see if the card is detected on windows.

 

Assuming you already did and the card is detected, make sure you are using a good adapter from miniDP to whatever is what you use.

The Englishman
0 Likes
aliabag
Adept I
Monday

The issue may be due to the motherboard prioritizing the Ryzen 3200G's integrated graphics. Follow these steps:

  1. BIOS Settings: Enter BIOS and set the primary display output to PCIe (PEG) instead of integrated graphics.
  2. Check Power and Connection: Ensure the Quadro P600 is seated correctly in the PCIe slot and that any required power connectors are attached (if applicable).
  3. Test the Card: Connect the Quadro to another system to confirm it’s working.
  4. Cable and Monitor: Verify the mini DisplayPort cable and monitor input are functional.

If the Quadro still doesn’t display an image, it may be a hardware issue with the GPU.

0 Likes