General Discussions

[jomel1104]

I decided to go dual screens for my set-up (one HDMI and one VGA) recently. The HDMI monitor(Monitor 1) is good. My issue is with the VGA connected monitor (Monitor 2). The monitor I am using is an NVision N220HD monitor with resolution of 1600x900 but the display settings only show resolutions for a 4:3 aspect ratio ( 1280x1024 , 1440x900 , 1152x864 ).

I only have one HDMI port and once VGA port on my board and I am not sure how to fix the resolution issue. I tried connecting Monitor 2 via HDMI and it works perfectly. Same issue with resolution when I connect monitor 1 to VGA. 

All drivers are up to date (tried updating them through device manager), any suggestions or recommendations on how I could fix the issue.

Thanks a lot in advance.
-Jomel1104 

[Heilstein]

I highly recommend to not use Windows build in Driver Updater, they tend to be outdated or use generic drivers or are simply the wrong drivers. Download them from your motherboards manufacturers website.

Do share what Motherboard you have aswell, if that didnt fix your issue.