cancel
Showing results for 
Search instead for 
Did you mean: 

Server Processors

luksz
Adept I

AMD uProf 3.4 installer

Hello, I need a link to AMD uProf 3.4 installer. Available versions (3.6 and 4.0) do not work on my machine (no "Assess performance" option). I used AMD uProf 3.4 before and it was OK, but I lost the installer.

1 Solution

Hi @luksz 

Sorry for the delay. We are actively looking into the issue of sharing the software.
We will keep you updated on the same.

View solution in original post

0 Likes
13 Replies
vtangutu
Staff

Hi luksz

Thank you for writing to us

Assess Performance is supported on 4.0 as well.
Please refer to Chapter 2.3 in the User guide (Table 7 and Table 10) {https://www.amd.com/content/dam/amd/en/documents/developer/uprof-v4.0-gaGA-user-guide.pdf}
Can you please share the details to help us understand your issue better like
O/p of AMDuProfCLI info --system 
OS details
Steps you are following to profile

Thanks 
Hemanth

I have an old PC with AMD FX-8370 Eight-Core Processor running Windows 10. uProf 3.4 works out of the box after installation. 3.6 and 4.0 doesn't have hardware counters.

0 Likes

Hello @luksz 

We are checking the feasibility of sharing the older version of AMDuProf.
Will get back to you for the same.
In the meantime, can you please share the below o/p.
"./AMDuProfCLI info --system"

msinfo32.png

Output of AMDuProfCLI info --system

[OS Info]
OS Details : Win1021H1-64

[CPU Info]
AMD Cpu : Yes
Family : 0x15
Model : 0x02
Stepping : 0x0
Local APIC : Yes
Number of Cores : 8

[PERF Features Availability]
Core PMC : Yes
PERF TS : No

[IBS Features Availability]
IBS : Yes
IBS Fetch Sampling : Yes
IBS OP Sampling : Yes
IBS FetchCtlExtd : No
IBS ExtCount : Yes
IBS Dispatch : Yes
IBS BrTgtAddr : Yes
IBS OpData4 : No

[RAPL/CEF Features Availability]
RAPL : No
APERF & MPERF : Yes
Read Only APERF & MPERF : Yes
IRPERF : No
HW P-State Control : Yes

[PERF features supported by OS]
TBP Supported : Yes
EBP Supported : Yes
IBS Supported : Yes
IRPERF Supported : No
APERF Supported : Yes
MPERF Supported : Yes

[Hypervisor Info]
Hypervisor Enabled : No

0 Likes

Hi @luksz 

AMDuProf versions before 3.6 are not available to public.
Can you please share the o/p of the command : "./AMDuProfCLI info --system"

0 Likes

I appended the output at the end of my previous message. Why older installers are not available? I used AMD uProf 3.4 before and it was OK out of the box, but I lost the installer. You can end this topic in 10 minutes by sharing the installer, but we are talking about this several weeks. The program is only for my personal use.

0 Likes
luksz
Adept I

I have an old PC with AMD FX-8370 Eight-Core Processor running Windows 10. uProf 3.4 works out of the box after installation. 3.6 and 4.0 doesn't have hardware counters.

0 Likes

Hi @luksz 

Please contact us over email on toolchainsupport@amd.com  so that we can share the software.
Also please share the exact version you are looking for.

0 Likes

I have sent an email about 2 days ago. I don't remember the exact version of uProf 3.4. Maybe you can share the most recent one and I will check if it is ok?

0 Likes

Could someone respond to my email?

0 Likes

Hi @luksz 

Sorry for the delay. We are actively looking into the issue of sharing the software.
We will keep you updated on the same.

0 Likes

I sent an email two weeks ago. Will you share the installer or not?

0 Likes

Thank you for sharing the installer. Hardware counters are available.

0 Likes