PC Drivers & Software

[atmosphere]

After installing the latest StoreMi drivers, system wasnt able to boot. 

Error: inaccessible boot device.

After using dcim to remove storemi i got back in Windows.

Using a nvme samsung 980 pro, Intel dc2600 480GB sata SSD and 2 * 2TB WD gold on win10.

Bios is set to ahci btw.. all drives show up. No error during storemi install, but after requested reboot BSOD.

Any suggestions on how to keep nvme as my boot drive and only using sata ssd+HDD for StoreMi 

I've got raid drivers installed as i tested that previously but bios is set as AHCI atm.

[AMDee · Accepted solution]

I suggest to clear the RAID drives first.
Install the fresh OS on NVME , secondary as SSD & 2HDD's while installing Storemi.

[atmosphere]

Thanks.. i'll try clearing the raid drivers, disconnect all other drivers and install again. 

[anyen]

did you solve the problem?

[atmosphere]

Tried fresh os, and was able to boot after setup, though not sure if drivers got installed correctly. 

Going to try that, but hoped i could use on my existing OS to accelerate steam lib.