Looks like your AMD driver wasn't installed correctly or was corrupted. You should have at least 3 boxes check marked in GPU-Z.
You have a legacy APU (A10-4600M with HD7660g) and you installed one of the two legacy AMD drivers available. You might want to try the BETA 2016 driver and see if OpenCL is enabled: https://www.amd.com/en/support/apu/amd-series-processors/amd-a10-series-apu-for-laptops/a10-4600m-ra...
If by reinstalling the AMD generic laptop driver doesn't work then you need to download and install your Laptop's Support OEM AMD Driver and see if OpenCL is enabled.
But first use this basic method to remove and install the AMD Driver in your laptop:
Uninstall the current AMD Driver using DDU as per this method:
It could be due to a corrupted AMD Driver installation.
Download free program DDU (Display Driver Uninstaller). Run it in Safe mode with the internet disconnected.
You can also run it in Windows Desktop but then you would need to Reboot the computer for DDU to finish erasing all of the AMD Driver traces from your computer.
Once it finishes uninstalling the current AMD Driver in Safe mode and boots back to Windows Desktop, still with the Internet disconnected, delete the AMD Installation folder C:\AMD if it was created before.
Now install the full AMD Drive package you downloaded manually from AMD Download page. Not the express package. Run the package and if it installs correctly again delete C:\AMD folder and reconnect the internet.
This should prevent any conflict when installing the new version from the previous version.
By the way, C:\AMD is always created whenever you run the AMD Driver package
Note: The APU AMD Driver will install both the integrated (HD 7660g) and Discrete GPU (7600M series) drivers
