cancel
Showing results for 
Search instead for 
Did you mean: 

PC Processors

astroz777
Journeyman III

Ryzen 5 8600g Black Sreen - Crash drivers

Hello!

Specs:
Ryzen 5 8600G
Mother Asrock A620M-HDV/M.2+ AM5 DDR5
1XMemoria Team DDR5 16GB 5600MHz Elite Plus CL46 BlackM.2+ AM5 DDR5
BIOS VERSION: 2.10 - Update AGESA to ComboAM5 1.1.0.3

OS: Windows 11 Version 23H2 
AMD DRIVERS VERSION (LAST): Adrenalin 24.5.1 (WHQL Recommended)

Error: BLACK SCREEN THEM AMD DRIVER TIMEOUT.
Reproducing ERROR: There is not time to happen, but when i using chrome, like youtube, seeing videos, editing in PH, playing games, in a random time could be as soon i open or later 6 hours of use, it pop ups the error. First got a Black Screen and them a AMD ADRENALIN MSG that Drivers timeout.

Any ideas? what could i do? anyone is happening same? maybe is a problema with the IGPU Of my New Ryzen?

List of things i already did:

* UpdateD all (windows and amd drivers)
* USE DDU to uninstall, start up in safety mode and them install drivers.
* Up to 4 g VRAM (It was on AUTO - getting 500mb)
* Updated BIOS
* Swap memory ram from slot a1 to b1 and b1 to a1 (there is only one module)

Things may be doing if not getting any help:

* Buying another ram? i think is more stable using 2 modules instead of only one (i had ryzen 3 3200g, not black screen problems but 2 modules using dual channel increase it performance)
* Last i wanted to do: Claim to supplier for a new Ryzen and returning back the one i got.

Ideas?



 

28 Replies
misterj
Big Boss

astroz777, please do a Clear CMOS and stay out of BIOS. If you have two sticks of memory, try one at a time. If you did not get your AMD drivers here, please do. You are far from RMAing anything. Please look in Event Viewer and post the BASIC tab for a few CRITICAL errors. Please post a screenshot of Ryzen Master (RM) running Cinebench R24 multicore. Thanks and enjoy, John.

FunkZ
Grandmaster


@astroz777 wrote:

Ryzen 5 8600G
1XMemoria Team DDR5 16GB 5600MHz Elite Plus CL46 BlackM.2+ AM5 DDR5
List of things i already did:
* Up to 4 g VRAM (It was on AUTO - getting 500mb)
Things may be doing if not getting any help:
* Buying another ram?


Using only a single stick of 16GB DDR5-5600 CL46 is very bad for performance. Operating in 64bit single channel rather than 128bit dual channel means you are restricting the system to half of the available bandwidth of the IMC. Plus the timings of CL46 are very poor, for literally only a few dollars more you could have DDR5-6000 with CL38 or even better CL30.

Since the IGP of the 8600G uses system memory for graphics performance it is even more important to have the best memory you can reasonably afford especially as you are using the system for gaming.

FYI manually adjusting the UMA Buffer from default 512MB to 2GB gives only a minor improvement to performance. Going higher than 2GB has virtually no improvement to performance.

Ryzen R7 5700X | B550 Gaming X | 2x16GB G.Skill 3600 | Radeon RX 7900XT
Ryzen R7 5700G | B550 Gaming X | 2x8GB G.Skill 4000 | Radeon Vega 8 IGP
Ryzen R5 5600 | B550 Gaming Edge | 4x8GB G.Skill 3600 | Radeon RX 6800XT

FunkZ, I think we are trying to understand a crash. Once this is understood the user can maximize performance. John.

Understood. The error is related to graphics. The graphics are using system memory, which is not in a recommended configuration.

Ryzen R7 5700X | B550 Gaming X | 2x16GB G.Skill 3600 | Radeon RX 7900XT
Ryzen R7 5700G | B550 Gaming X | 2x8GB G.Skill 4000 | Radeon Vega 8 IGP
Ryzen R5 5600 | B550 Gaming Edge | 4x8GB G.Skill 3600 | Radeon RX 6800XT
blackscreensad
Journeyman III

I bought the same processor and I'm having the same problem. Did you solve the problem?

0 Likes

What is your complete equipment? And the monitor?

 

I also experienced a similar problem after a certain BIOS update. In the link below you can see what I did:

https://community.amd.com/t5/processors/black-screen-igpu-ryzen-9-7950x/m-p/674570#M59165

0 Likes

Problem solved !!!  The authorized service sent me a new product under warranty. The new product work smoothly.

0 Likes
roupa_de_trapo
Adept III

Place the memories as indicated in the motherboard manual, then leave them in standard mode without touching anything. Go to the option that allows you to indicate the amount of memory that the graphics will use and enable a static value (for example, 2 GB). Is your monitor HDMI or DP?

 

test the memories on TM5 with profile 1usmus_v3. If it passes, it is not memory in standard mode. Spend some time without touching anything to see if a black screen occurs. If it doesn't happen, start optimizing other parameters, but don't change anything in the memories leaving them at the default that the BIOS found. Keep note of the behavior. If nothing happens, you can try to optimize the memory little by little, taking note of what happens.

 

I also experienced a similar problem after a certain BIOS update. In the link below you can see what I did:

https://community.amd.com/t5/processors/black-screen-igpu-ryzen-9-7950x/m-p/674570#M59165

As per your suggestion, I have set my RAM to default settings (4800 MHz, disabled EXPO), and I will observe how things go.

It has been almost a week, and the black screen error has not reoccurred. Solution: Disabled EXPO profile, seems the iGPU cannot handle 6000MHz RAM while YT is full of videos suggesting 6000+ MHz mem for 8600G.

0 Likes

try a more updated version of your motherboard's BIOS, if there are problems, report it to the motherboard manufacturer so that they can fix it in new versions and do this soon, because with new releases these manufacturers tend to stop supporting products old ones.

 

the memory timings, when XMP or EXPO do not work, must be adjusted manually and one by one. This also happens to those who have Intel processors with DDR5 and tends to improve as more users report problems with tests and screenshots on the motherboard forums. Another thing is also regarding support from the DDR5 manufacturer you are using, you can contact them and ask them to resolve this problem together with AMD and the motherboard manufacturer, as no user is forced to find the solution alone. solution and your product must still be under warranty.

 

In my case, I have been requesting help from the manufacturer of the DDR5 I have and the evolution was slow and gradual, with BIOS versions that did not allow BOOT, and I had to contact the motherboard manufacturer to improve support, which is why I have been following developments and providing as much data as I can so that they can assess what has worsened and what can be adjusted.

0 Likes

Hi,

========== 

ryzen 5 8600G|ASRock B650m Pro RS|G.SKILL 2x32G 6000|PNY 4x4 1TB|FSP HV Pro 650W 80+|Deep Cool AG620 Dual Tower

monitor Samsung 32 Inch Curved, Asus VG35 Curved, Asus Zenscreen MB16AT

==========

been tried : 

1. UMA Specified, Try 4G, 8G, 16G

2. only attached DP 2.1 (besides try HDMI,DP and USB Display Link)

3. DRAM Auto (JEDEC) 

4. BIOS Update (To 3.01)

5. install Adrenaline (Driver only) for 7 difference driver (24_1-2-3-4-5-6-7)

6. another experiments running and stop services in windows (always rollback if failed) 

 

none of above making my PC Desktop Running in Good and Stabil Condition 

sometimes it hung and throw amduwg23 stop responding (but usually after this log appear display return normal and I can use this PC), and most annoying it turn black (all my screen -- of course with combination of 3 screen and its connection above), I lost my saves Doc (fool I am using this abnormal PC for my works). 

sometimes it also BSOD with HYPERVISOR__ERROR. during this writing it takes me to reset my PC 4 times. 

I use my PC only for works (not for gaming). 

I cant reproduce this issue as my will. sometimes I can use this PC for more then 8 hour, but when I restart it, usually I need more then 5 times reseting my PC. most often I cant use it. 

hopefully someone else could break this issue. does installing some external VGA could solved this problem ? if yes so I'll immediately bought some nvidia dVGA. 

 

Regards,

0 Likes

First, you need to test the stability of the memory at least at the lowest clock standard, which is automatically configured when you turn on the computer, without changing anything. The JEDEC standard has to work, if it doesn't it becomes difficult to do other things and the RMA has to be done. Furthermore, even if you manage to resolve it through a maneuver, such as using a static value for the amount of DDR5 memory that the internal graphics will use, you can request RMA, because the processor should be able to work well even if the dynamic memory is selected.

0 Likes

hi, fortunately My driver timed out problem has gone away after I : 
1. set UMA_SPECIFIED with 8G RAM allocated 

2. downgrade adrenaline 24.7 becomes 24.6 
3. disable issue detection (some forum said that this feature will restart the driver whenever error detecting, so its better stutering then timedout)

4. enable openGL Triple Buffering

5.  diasble hyper_v (after I've done step 1-4 , my computer still become BSOD Hypervisor_error)

6. once I disable SMT, but my PC keep BSOD with hyperv_error even I disabled it. so I re-enable SMT. 

7. I set PBO+TJMax85 + -30mv curve optim (realy dont understand actually but just try and error). 

8. on chrome://flags enable override software rendering list

 

I dont know which one activity above has big impact on my PC. since I've been spent a lot of time I decide to keep this current setting (really desperate spending almost 2 weeks since I bought this PC) 

 

Thank you roupa_de_trapo and AMD Community Forum

0 Likes
mikchester
Adept I

I am facing similar problem on my 8600G, and I am using single channel RAM (16GB, 6000MHz).

 

VRAM is set to 2GB. How to resolve the sudden black screen problem?

0 Likes

Maybe your problem is one of stability, not whether of the memory is in static or dynamic mode. To isolate the problem, first set the memory to JEDEC standard with XMP or EXPO disabled. Set the iGPU memory setting to static mode at whatever amount you see fit, as it doesn't matter and shouldn't interfere, but for testing, leave a value of 1GB. Then, run a memory testing application like TM5 with the 1usmus v3 profile. Then, optimize the other parameters without touching the memories, saving and writing them down. Finally, test memory optimization. In my experience, it is possible for XMP parameters that previously worked to no longer work or even happen with EXPO. In these cases, you either search for the best configuration by hand or request support from the memory manufacturer to contact AMD to resolve the problem in a new BIOS release.

0 Likes

There are a lot of people that bought this processor, that are having the same problem. 

I tried everything. Nothing works for me. I didn't find nobody that have solved it.

The only thing that "worked" for me was to deactivate the graphics drivers to be able to work. Which it makes me wonder. How the hell the PC works better with no GPU running?

I'm freakin' poor from a freakin' poor country (And if that's not enough, I payed double the USA price ). But I'm not complaining about that, it's just a fact. I bought this processor as an investment. It gives me no more than headaches. 

The only reason of commenting here is because I have the stupid illusion that somebody is gonna fix it and give a real solution to it.

 

 

ThreeDee
Paragon

What power supply make and model are you using?


ThreeDee PC specs
0 Likes

Fuente Pc Aerocool Cylon 700w Rgb 80 Plus Bronze

0 Likes

I'd recommend replacing that power supply with a quality unit before you lose any hardware

 

https://cultists.network/140/psu-tier-list/


ThreeDee PC specs
0 Likes

For anyone who reads this. It's not the power supply, obviously. It's 99% sure that the processor that came defective. So, change it if you are under warranty

cslaughter
Adept I

I think AMD has a BUNCH of bad 8600Gs. I just went through 3 motherboards and three 8600Gs.

 

I am building 2 builds for a client.

 

I ordered two Gigabyte B650M DSHP Motherboards and two AMD 8600Gs. One pair would boot the other would not. Did the QFlash thing and what not. Nothing mattered.  Ordered a replacement motherboard and focused on the working pair. It was when I went to install the display driver that I ran into a new problem. The system immediately black screened and crashed after about 60 seconds. This happened on fresh installed of both Windows 10 and 11. Nothing but the basics on the BIOS, not even Expo or AMP turned on. Even tried an upgraded install from 10 to 11 for the hell of it. 

 

I reached out to AMD whom told me this sounded really strange.

 

Meanwhile the new motherboard shows up and I pop the CPU from the none working build into it, QFlash the BIOS and nothing. Tired some other new RAM and the RAM from the working build; nothing. What gives?? Ordered a new 8600G. 

 

New 8600G shows up and I put it into the non working build. It post, boots , and the display driver installs no problem. 

 

I put the original working builds CPU in and it crashes. Put the new CPU back in and it works.

 

I  have built roughly 800 AMD builds in my life and only had 3 bad AMD CPUs, and suspected 2 more. Since the first of the year, I have one AMD CPU failure and now it looks like two more bad AMD CPUs. Something is not right with these.

impedance adjustments that can be complicated to find, you have to test each value and observe whether the system is more or less stable, it involves considerable work. Generally the best watch has to be obtained by hand through persistence or it stays at the basic standard 4800MTs. Changing the DDR5 timings also helps, but you need to understand what is being done, but remember that the larger the clock, the more difficult it is to have stability with tighter timings.

I hope that AMD will be able to test more and release new, more stable BIOS versions, however, with new releases coming, like Zen 5, it is certain that we will still have some problems. And with so many changes that have already occurred, some tips posted previously are no longer valid.

0 Likes

Well the I sent the processors back to AMD after I examined them a bit. Was not hard to see the issue. Pads miss aligned on the bottom of the processor and touching each other.

 

Strange that AMD just pulled back all of the 8000 series for a packaging issue, and insisting that the problem is not with the design or assembly of the processors.

 

Sounds like maybe the same issue.

 

Yes it takes some work to stabalize builds with higher clock speeds and tight timings. But, when a system crashes when initializing it's full iGPU, and a replacement CPU does not have the same issue, that is not a speed or timing issue, if everything is set to stock settings and basically running at much slower speeds and relaxed timings. 

0 Likes

Maybe there are cases like this with a mechanical defect, so there is no way to try to get around it and the RMA is the only immediate way. The cushions should not come off easily and a user may have difficulty observing this problem, so I hope the manufacturer improves the quality of its products so that this type of problem does not recur so easily.

 

AMD Processors With Physical Damage Due to External Causes 

0 Likes
thiagosennin
Journeyman III

i have the same issue

cpu: ryzen 8600g

motherboard: msi b650m pro

32gb ram ddr5 16x2

500gb ssd

windows 11

0 Likes

definetely, it was the processor that came defective. They already sent me a brand new. So far, no issues

0 Likes
Glates
Newcomer

I registered here to raise the same issue. i have a motherboard ASUS A620M-K Prime with 32gb RAM
(Kingston fury beast 4800mhz 16gb x2)
1TB SDD M.2
Monitor MSI G27C5
and i did all for try to get a solution, but the desktop don't stop to crash out.

i tried changing the hz from 144hz to 60hz monitor.

changin all options and combinations in amd adrenaline, but all the time i'am getting crashes, when i saw a video, when i play, when i am meeting. the true amd 8600g feels it like a trash.

0 Likes