cancel
Showing results for 
Search instead for 
Did you mean: 

PC Graphics

heloworldd
Adept I

No display on the monitor

I just built my first pc, but when I start it doesn't give me any signals on the screen (it keeps saying "no signal"). I don't know where the problem could be. I think I've set all the cables correctly and every part should be in the right place. I tried to clean ram sticks and placed them in other positions and I've cleared CMOS too.

My components are:

-amd itx radeon Rx 6400

-corsair vengeance lpx ddr4(2x8 GB)

-wd Blue SN570 (500 GB)

-asus prime b550m-k

-amd ryzen 5 5500

-600 w Gold evga

 

 

 

 

 

 

0 Likes
1 Solution
heloworldd
Adept I

Ive maybe found the solution. It seems that the graphic card has a problem with the part that connects to the mother board. Thx for the reply hrpuffnstuff:)

View solution in original post

3 Replies
hrpuffnstuff
Miniboss

Is the monitor set to the input port you are trying to use?  Are you plugged into the gpu port or the onboard port?  Have you tried switching outputs?  Have you tried a different cable?  Have you tried a different monitor?  Does the monitor work on another pc?

0 Likes

Yes the monitor is on the exact output and it works with other devices. I even tried with different cable but the issue persists. I tried both the onboard port and the GPU port but it doesn't change anything. 

0 Likes
heloworldd
Adept I

Ive maybe found the solution. It seems that the graphic card has a problem with the part that connects to the mother board. Thx for the reply hrpuffnstuff:)